|10/100 BaseFX Ethernet LIM (J6831A)
The JDSU 10/100 BaseFX Ethernet LIM (J6831A) plugs into the Protocol Analysis Probe - DNA (J6801B), Protocol Analysis Probe - DNA MX (J6802B) and Protocol Analysis Probe - DNA PRO (J6803B) platforms.
10/100 BaseTX Ethernet LIM (J6830A)
The JDSU 10/100 BaseTX Ethernet LIM (J6830A) plugs into the Protocol Analysis Probe - DNA (J6801B), Protocol Analysis Probe - DNA MX (J6802B) and Protocol Analysis Probe - DNA PRO (J6803B) platforms.
1000 BaseX Ethernet LIM (J6832A)
The JDSU 1000 BaseX Ethernet LIM (J6832A) accommodates a pair of GBIC interface adapters for handling Gigabit Ethernet over short reach (SX) or long reach (LX) optical fiber, or unshielded twisted pair (UTP), Category 5 cable, or any combination of these.
16 Port Ethernet LIM for J6804A (J6851A)
The JDSU 16 Port Ethernet LIM for J6804A (J6851A) plugs into the JDSU Protocol Analysis Probe - DNA HD (J6804A) and is used for data acquisition, filtering, and time-stamping of Ethernet traffic for analysis with the JDSU Signaling Analyzer Real-Time (SART) and the JDSU NgN Analysis System.
16G Fibre Channel Load Tester
The Xgig Fibre Channel Load Tester is the first generation tool with a high speed 14 Gbps Fibre Channel (16 GFC) protocol available on the market.
4 Port OC-3/STM-1 LIM Multiplexer (J6828A)
The JDSU Four Port OC-3/STM-1 LIM Multiplexer (J6828A) is designed to be used with the JDSU STM-4/OC-12/STM-1/OC-3 LIM (J6810B) to allow the simultaneous monitoring of both directions of four STM-1/OC-3 circuits.
8 Port E1/T1 LIM (J6824A)
The JDSU Eight-port E1/T1 LIM (J6824A) helps network professionals isolate and resolve network problems quickly on ATM Inverse Multiplexing for ATM (IMA) and 3G networks.
8 Port Ethernet LIM for J6804A (J6850A)
The JDSU 8 Port Ethernet LIM for J6804A (J6850A) plugs into the JDSU Protocol Analysis Probe - DNA HD (J6804A) and is used for data acquisition, filtering, and time-stamping of Ethernet traffic for analysis with the JDSU Signaling Analyzer Real Time (SART) and the JDSU NgN Analysis System.
漂移分析软件能够导入和分析 TIE 数据，是一款先进的同步评估工具。 除 TIE、MTIE 和 TDEV 评估外，还拥有其他多种分析功能： RTIE、MRTIE、MADEV、ADEV、FFO 及 FFD 分析。
Assurance Solutions for Fixed Voice
Our solution for fixed voice is the most scalable and easy-to-use system for network, service and voice-quality monitoring, diagnostics, root cause analysis and repair.
Bus Doctor 1.5 and 3G SATA Protocol Analyzer
The Serial ATA Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics that are needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration post-capture filtering of Serial ATA packets.
Bus Doctor ATA/ATAPI/UDMA Protocol Analyzer
The ATA/ATAPI/UDMA Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding, and statistics needed by software and systems testers. The ATA/ATAPI pod supports both normal and small form-factor connectors.
Bus Doctor CardBus Protocol Analyzer
The CardBus Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of CardBus transfers.
Bus Doctor Compact Flash Protocol Analyzer
The Compact Flash Pod turns the Bus Doctor into a full-featured protocol analyzer, supporting 3.3V systems, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of Compact Flash transfers.
Bus Doctor Logic Protocol Analyzer
The Logic Pod turns the Bus Doctor into a full-featured logic analyzer, with the depth, ease-of-use, symbolic decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis. Each Logic Pod has 18 channels for logic analysis.
Bus Doctor PCI Express (PCIe)
The new and advanced Bus Doctor Gen 2 PCIe protocol analyzer supports bi-directional traffic capture and analysis of PCIe x1, x4 and x8 modes. Powerful pre-filtering and triggering options permit engineers to home in on any sequence of PCI events or conditions. In the x8 configuration, up to 18.4 GBs of capture buffer is available.
Bus Doctor PCMCIA Protocol Analyzer
The PCMCIA Pod turns the Bus Doctor into a full-featured protocol analyzer, supporting 3.3V systems, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers such as multi-level triggering, filtering, state configuration and timing analysis of PCMCIA transfers.
Bus Doctor SCSI Protocol Analyzer
The SCSI 320 Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of SE and LVD transfers.
Bus Doctor SD/SDIO/MMC Protocol Analyzer
The Bus Doctor RX SD/SDIO/MMC protocol analyzer allows storage, silicon, and design engineers working with this technology to capture, decode and analyze bus states, command tokens, and response tokens, and to measure bus performance.
Bus Doctor USB Protocol Analyzer
The USB Pod turns the Bus Doctor into a full-featured protocol analyzer with the depth, ease-of-use, protocol decoding, and statistics needed by software and systems testers. It supports Low, Full and High speeds (USB 1.1 and 2.0) and has a special Chirp mode for viewing the chirp handshaking activity. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of USB transfers.
Bus Doctor 系列产品概述
Bus Doctor（总线医生） Rx 产品具有模块化设计，携带性强，配有深度跟踪缓冲区，多功能设置以及功能丰富的软件，这使其成为世界上功能最为强大的协议分析仪。 Rx 兼容所有 Bus Doctor 协议分析仪总线转接盒，提供业界最大的选择范围。
CWDM, 8 Channel Multiplexer, LGX™
Reliable, cost-effective 8-Channel CWDM Mux/Demux multiply the capacity of existing single mode fiber, by combining up to eight ITU-T G.694.2 compatible channels into a single optical fiber.
Dispersion Compensation Module (DCM)
Negative dispersion for DWDM transmission systems, can be used to compensate dispersion on standard single-mode optical fiber (SMF) across the entire C-Band.
Distributed Test Manager 32
Allocate valuable testing and troubleshooting resources more effectively via remote PC access to JDSU communications analyzers.
DNA (J6801B) 协议分析仪
协议分析仪 - DNA (J6801B) 是一种便携式的数据采集和分析系统，用于远程和分布式故障诊断。 您可以在本地控制 DNA 设备，或使用一台独立电脑实现远程控制。 DNA 设备包括采集硬件，并可放置线路接口模块 (LIM)。
DNA HD (J6804A)协议分析仪
JDSU 协议分析仪 - DNA HD (J6804A) 是一种机架式协议采集和分析的解决方案。 它支持8个或16个千兆以太网端口， 专为信令分析仪实时 (SART) 应用工具或 NGN 分析系统软件而设计。
DNA MX (J6802B) 协议分析仪
JDSU J6802B 分布式网络分析仪 MX 是一个机架式协议采集和分析的解决方案，内置一台计算机和综合网络分析仪软件。 DNA MX 包括数据采集硬件，并可放置线路接口模块 (LIMS)。
DNA PRO (J6803B) 协议分析仪
JDSU 协议分析仪 - DNA PRO (J6803B) 是一种便携式的协议采集和分析解决方案，配有嵌入式计算机和综合网络分析仪软件。 DNA PRO 包括数据采集硬件，并可放置线路接口模块 (LIMS)。
DSAM Digital Service Activation Meter
Handheld field meter for DOCSIS/EuroDOCSIS cable modem installation; enables cable installers to increase the speed and efficiency in deploying high-speed data and video services.
DSAMobile iPad® Application
Increases technician productivity with intuitive portable interface and ability to view all necessary test results, including all channels and multiple measurements, on one large screen remotely.
DWDM, 13 Channel Multiplexer, LGX™
13-Channel DWDM Mux/Demux modules with low-loss narrowband filters allow 13 ITU, 200 GHz spaced channels to be multiplexed onto a single fiber.
DWDM, 32-Channel Universal Multiplexer
Maximizes the capacity of the C-band range, and in conjunction with the WaveReady line of transponders and amplifiers supports a wide range of architectures.
E1 (75 Ohm BNC connectors) LIM (J6817B)
The JDSU E1 (75 Ohm BNC connectors) LIM (J6817B) can be used with the Protocol Analysis Probe - DNA (J6801B), the Protocol Analysis Probe - DNA MX (J6802B) and the Protocol Analysis Probe - DNA PRO (J6803B) platforms. It has 75 Ohm BNC connectors.
E1/T1 (RJ45/48C & DB9 connectors) LIM (J6816B)
The JDSU E1/T1 (RJ45/48C & DB9 connectors) LIM (J6816B) can be used with the Protocol Analysis Probe - DNA (J6801B), the Protocol Analysis Probe - DNA MX (J6802B) and the Protocol Analysis Probe - DNA PRO (J6803B) platforms. It has RJ45/RJ48C and DB9 connectors.
E3/T3 (DS3) LIM (J6813B)
The JDSU E3/T3 (DS3) LIM (J6813B) helps network professionals isolate and resolve network problems quickly and has 75 Ohm BNC connectors.
网络测试仪测量以太网供电 (PoE)、检测高达 100Mb/s 的活动设备、执行ping、闪烁链路指示、测试布线配置、显示电缆长度并生产语音。
Addresses the entire Ethernet Service deployment life cycle including turn-up acceptance, SLA/performance monitoring and reporting, and test and troubleshooting.
NetComplete® Ethernet PM Application
Provides performance management capabilities including data collection, correlation, analytics and reporting enabling service providers to proactively identify faults, troubleshoot and resolve problems and perform trend analysis and capacity planning.
NetComplete® Service Assurance for xDSL
Comprehensive system for commissioning, troubleshooting, and managing xDSL services including pre-qualification, turn-up, spectrum management, narrowband/wideband copper, and xDSL service testing.
Network Analyzer 10 GigE Software (J6865A)
JDSU Network Analyzer 10 GigE Software (J6865A) lets you quickly troubleshoot and perform complete protocol data analysis on 10 Gigabit and 1 Gigabit Ethernet networks.
Testing and verification for physical and transport layer, jitter and wander at bit rates of 40/43G with unframed signal and framed signals for SDH/SONET/OTN.
ONT DSn/PDH Single/Dual Port
Tests boards and systems with combined transport technology and DSn/PDH services; provides testing functionality for T-carrier and E-carrier signals including multiplex chains.
ONT G.709 OTN
Provides full functionality for system verification of G.709 and G.sup43 equipment, including extensive FEC testing.
In combination with ONT 2.5G and 10G, allows generation and analysis of up to 1,000 simultaneous VC-12/VT1.5 channels in 2.5 and 10 Gbps signals.
ONT NewGen EoS
The industry's first fully functional Ethernet over SONET/SDH test solution, including Virtual Concatenation with LCAS emulation, Generic Frame Procedure, and Ethernet MAC frames.
ONT-600 Multiport Test Module (MTM)
The MTM provides high density 155M to 11.1G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fibre Channel.
Optical Amplifier, EDFA, Multichannel (WRA-217)
Simple, economical C-band optical amplification solution in a flexible, ready-to-use package includes an advanced gain control circuit, an efficient pump laser and a midstage variable attenuator.
OTS-55 Optical Talk Set
Provides clear digital voice transmission over a single fiber; hands free operation makes communication convenient for technicians using a headset or speaker phone mode.
QT-200 xDSL and Triple-Play Probe
Provides unsurpassed ability to pre-qualify, provision, maintain, monitor, and troubleshoot xDSL triple-play services as well as copper loop and POTS lines.
QT-600 Ethernet Probe
Enables fully automated service activation and verification for Carrier Ethernet applications including Business Services and Mobile Backhaul.
With easy configuration and full integration with the JDSU RANAdvisor platform, RANAdvisor Backpack is the complete test collection and analysis solution and the lightest backpack available.
RANAdvisor Data Services and Video Testing
RANAdvisor provides a comprehensive set of tools for testing data and video connections over your network. Parallel sequencing enables the full exercising of 3G and 4G broadband data capabilities.
RANAdvisor Gladiator Post-Processing
RANAdvisor Gladiator is a post-processing optimization platform that utilizes data from multiple sources. Data streams are combined including air interface & location information to quickly identify and solve network optimization problems.
RANAdvisor Handheld Network Monitor
With easy configuration and full integration with the RANAdvisor platform, you have a complete test collection and analysis solution in the palm of your hand.
RCATS QoS Management Systems
Allows mobile operators to assure efficient service turn-up, troubleshooting, and performance management of subscriber services while minimizing dispatches and trouble tickets.
Report Center Software (J6848A)
JDSU Report Center Software (J6848A) allows you to visualize, analyze and document Network Analyzer and Telephony Network Analyzer test results for network characterization, baselining and troubleshooting.
SART (J7361A)--适用于 UMTS Femtocell
JDSU 实时信令分析仪是 2、2.5、3 和 4G 系统验证、故障排除以及无线接入网 (RAN) 优化的高性能解决方案。 SART 具有的家庭基站实时诊断和故障排除能力，使得网络工程师通过实验室试验能够快速地实现网络部署，加速规模扩展，并进行详细的历史数据分析。
SART (J7840A)--适用于 PSTN
JDSU 信令分析仪作为一种高性能的解决方案，能够对 2G、2.5G、3G 和 4G 进行系统验证、故障排除和 RAN 架构优化，实现完整覆盖，从 PSTN 网络到其余网络实现端到端的呼叫关联。
SART (J7840A)--适用于 SS7
JDSU 实时信令分析仪 (SART) 是 2G、2.5G、3G 和 4G 系统验证、故障排除以及无线接入网 (RAN) 优化的高性能解决方案。 以智能跟踪为中心的处理方法支持 SS7 演进。
SART (J7844A)--适用于 IMS
JDSU 实时信令分析仪是用于 2G、2.5G、3G 和 4G 系统验证、故障排除和无线接入网优化的高性能解决方案。 IMS 的具体优势，包括先进的解码能力，强大的呼叫跟踪能力和高效的信号分析能力。
Shelf, DenseMount, WaveReady 3100
1U, two-slot, rack-mount shelf ideally suited for remote terminal and stand-alone network applications provides power, monitoring, cooling, and management for all available WaveReady 3000-series modules.
Shelf, DenseMount, WaveReady 3500F
Fan-cooled optical provisioning platform targeted for metro access/edge and Inter-Office Fiber (IOF) applications accommodates up to 13 WaveReady modules managed by a WaveReady communications module.
Small Cell Assurance Solution
JDSU small cell solution including NetComplete EtherASSURE and PacketPortal Intelligent Network Visibility and Ethernet Assurance Microprobes.
SmartClass Home HPNA
Speeds installations of HPNA home networking services and troubleshooting of inside wiring issues.
All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, IP data, VoIP, and IP video testing.
SmartID Advanced Coax Probes
Solution for problematic coax home wiring reduces repeat calls and improves customer experience. With DSAM, comprehensively tests home coax networks in less than two minutes.
Data analysis software for advanced analysis, reporting, printing, and archiving of test results.
StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed.
Switch Module - Ruggedized Small Channel Count
Switch for incorporating customized test assemblies and specialized applications operating multiple source measurement instruments, such as optical spectrum analyzers, wavelength meters, and power meters.
TPA Base Software (J6900A-001)
J6900A-001 is the Triple Play Analyzer base software. It conducts real-time analysis of video and voice streams, as well as the performance of your data network.
TPA Video QoE Option (J6900A-002)
The J6900A-002 IPTV QoE option performs objective measurements of IP video streams and analyze the reliability of the signaling operations such as channel zap time and VoD commands response time.
TPA Voice QoE Option (J6900A-003)
The J6900A-003 VoIP QoE option performs objective VoIP MOS and various RTP/RTCP QoS measures, such as packet loss, jitter and delay, etc.
Enables technicians to install and troubleshoot copper-based single pair and bonded pair VDSL2 and ADSL2+ circuits the right-way -- dual ended with UltraFED IIB.
Video Stream Analyzer (VSA)
Monitor and troubleshoot performance of digital video, IPTV and VoD applications with the Video Stream Analyzer. An integral part of JDSU’s end to end video monitoring solutions.
WaveReady ILA, Intelligent Line Amplifier
Combines industry-leading JDSU optical communications technology into a rugged, easy-to-use, compact, self-optimizing optical amplifier - specifically built for use in harsh conditions while dramatically reducing deployment costs and complexity.
WaveReady Node Manager
Simple solution for managing WaveReady modules and shelves through direct access to individual modules.
Xgig 10GbE/FC/FCoE Analyzer
JDSU's Xgig 10GbE and Fibre Channel Analyzer is a versatile, state-of-art solution for monitoring and analyzing live traffic of different storage protocols, including 10G Fibre Channel, 10GbE, iSCSI, FCIP, iFCP and iWARP.
Xgig 12G SAS
是一个完全集成的带有 12/6/3 Gbps SAS 多功能（分析仪、生成器、干扰器）的独立系统
Expert 软件的标准配备带有所有 Xgig 分析仪和 Bus Doctor RX 协议分析仪，是一个独特而强大的调试和分析套件，专为加速和简化设备开发和故障排除程序设计。
Xgig GbE/iSCSI 协议分析仪
Xgig，专为重型数据流量和复杂网络结构设计，为业界提供了一个可靠的千兆以太网和 iSCSI 等高带宽协议分析工具。Xgig® 千兆以太网/ iSCSI 分析仪
Xgig Protocol Analyzer Family Overview
The Xgig® Analyzer offers a wide array of advanced analysis capabilities including intelligent triggering, automated capture, and Xgig Expert analysis, troubleshooting time is reduced from hours to minutes.
Xgig Secure System Overview
The Xgig Secure System performs testing of Fibre Channel interfaces configured in any topology including those used in avionic environments, and provides traffic generation, error injection, and advanced analysis with data rates from 1Gb/s to 10.5Gb/s.
高密度 10G 以太网/ FCoE 负载测试仪具有业界最高的端口密度，在一个 3U 机箱配置有多达 32 个端口，让开发者能够验证 10G 融合以太网网络设备的可靠性和功能性。
Xgig 光纤通道 BERT
Xgig BERT 解决方案通过将向流量中注入数据模式，生成最坏情况下的数据负载条件，并使网络的物理层压力达到极限的方式大大简化了信号完整性认证和高速位误码测量程序。
JDSU 万兆/千兆以太网接口（J6872A）是一个全长全高的 PCI Express® 接口卡，提供 10Gbps 线速捕获、支持多种硬件过滤器以及网络关键性能指标，快速解决更多网络问题。
Polatis 多模光纤交换机托盘，利用 DirectLight® 波束控制技术，是一款结构紧凑、完全无阻塞的多模高性能产品。
C 系列测试仪可为刚进入该行业的新实验室和新工程师们提供通用的高性能解决方案。 C 系列为中小型连接器和跳纤生产商提供高性价比的入门级套件。