A-Z Product List

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

1-9

24/7 Technical Assistance Center (TAC) Support: This extends TAC services typically available only during normal business hours to 24 hours a day, 7 days a week. Pricing is based on the size of the installed base.
3GMA Drive Test Tool: Drive Test Tool 3GMA Measurement Solution for Mobile Communication Networks

Top of Page

A

ACT Autonomous Coverage Tester: Autonomous Coverage Tester ACT - Professional Equipment for unattended measurement of Mobile Communication Networks
AM 4/5/44/48 TIMS: A compact, user-friendly, yet powerful handheld analog transmission test set.
ANT-5 SDH Access Tester: Installation and commissioning solution for SDH, SONET, PDH, and ATM access networks with line rate testing from 1.544 Mb/s to 2.5 Gb/s
ATM Converter Family: A modular converter system based on a variety of freely selectable ATM, Utopia, and customized interfaces that replace the well-known ATM Utopia Converters UC-155, UC-25, LC-25, and LC-LVSD.

Top of Page

B

Base Station Analyzer GC7105A: Base Station Analyzer GC7105A for installation and maintenance of modern wireless communication systems
Benchtop Broadband Source: The high power JDSU Instrumentation Broadband Sources emit a higher optical output than conventional EELEDs and operate over the EDFA (1525-1610 nm) window.
Benchtop Erbium-Doped Fiber Amplifier: JDSU Instrumentation Erbium-Doped Amplifiers (EDFAs) amplify optical signals across the EDFA window (1528-1610 nm).
Benchtop/Rackmount Programmable Switches: The JDSU SB, SC, and SCG series of fiberoptic switches are programmable benchtop/rack-mount switches that can be controlled using the front panel keys and a numeric pad or via GPIB and serial RS232 interface.
Blended Learning: Take advantage of both on-site training and Virtual Classroom to maximize the learning experience.

Top of Page

C

Cable and Antenna Analyzers GC724B/GC723A: Cable and antenna analyzer GC724A for wireless base stations and repeaters
Calibration Plan Manager: Provides monthly reports detailing the status of your instruments in the calibration program.
CD Plug-in Module for T-BERD/MTS Platforms: Fast and cost-effective Chromatic Dispersion (CD) testing for Metro DWDM deployment.
Certified Equipment Program: JDSU Certified Equipment Program for reliable used equipment.
CLI-1750/ LST-1700 Home Wiring Test System: Combination leakage and signal level meter and home wiring test kit.
CLI-950, CLI-1450, and CLI-1750 Cable Leakage Meters: Combination leakage and signal level meters.
CN-100 Network Performance Tester: Dual media multi-line rate Ethernet and ATM interface modules provide a flexible platform for testing Ethernet and ATM. Full line traffic generation, monitoring, capture, internetwork testing, data integrity testing, real-time quality of service, and bit-error rate testing on all interface modules.
Coax Mapper: Test CATV and security camera coax connections and installations
CT-650 CENTEST Wideband Test Unit: Centralized test system providing multiple simultaneous tests from a single equipment shelf for DS3, DS1, and DS0 service rates. Also supports GSM and VF testing.
CWDM OTDR Plug-In Modules for T-BERD/MTS Platforms: In-Service CWDM OTDR test solution to maintain and troubleshoot CWDM fiber networks

Top of Page

D

DA-3200 Data Network Analyzer: Easy-to-use troubleshooting solution for today's IP-based services.
DA-3400 Data Network Analyzer: Easy-to-use troubleshooting solution for today's IP-based services across Ethernet, WAN, and ATM networks.
DA-3600A Data Network Analyzer: Most flexible and powerful data network analyzer available with the performance to meet the demanding needs of today's converged networks.
Distributed Test Manager 32: Allocate valuable testing and troubleshooting resources more effectively via remote PC access to JDSU communications analyzers.
DiviSeries and MatchX: DiviSeries and MatchX products help to achieve cost efficiency on broadcast test and interoperability applications, and can be used to validate both RF and baseband aspects of a broadcast chain.
DMTS Benchmarking Testing System: DMTS - Benchmarking Testing System. Multiprocessor Measurement & Test System for 2G, 2.5G and 3G Wireless Networks.
DSAM Digital Service Activation Meter: Lightweight, durable, handheld meter for DOCSIS/EuroDOCSIS cable modem installation. The DSAM enables cable installers, regardless of skill or experience levels, to increase the speed and efficiency in deploying high-speed data sevices.
DSAM-6000 Network Maintenance Sweep Meter with DOCSIS / EuroDOCSIS Capabilities: The DSAM-6000 combines triple play services testing, forward and return path maintenance, and Stealth Sweep™ Technology to deliver award winning performance. The DSAM-6000 is a Wavetek™ Series Field Meter.
DTS-200 MPEG-2 Field Instrument: Provides remote visibility into MPEG-2 streams to perform test applications.
DTS-330 Digital Broadcast Test Platform: Digital broadcast test platform performing MPEG-2 ATSC and DVB transport stream analysis, simulation, and generation.
DTS-A: The DTS-330 Analyzer Configuration: This transport stream analyzer helps solve configuration, interworking, and performance issues by isolating and diagnosing problems in the transport stream.
DTS-G: The DTS-330 Generator Configuration: This transport stream generator captures and plays MPEG-2 transport streams for equipment validation and testing.
DTS-M: The DTS-330 Multiplexer Configuration: This transport stream multiplexer allows users to create complex MPEG-2 transport streams for testing digital televisions or set-top boxes, enabling developers to quickly and efficiently bring their products to the marketplace.

Top of Page

E

EFL-10 Fault Locator Bridge: For fast and accurate fault location and quality testing of telecommunications cables.
ELA-10 Data Line Analyzer: The ELA 10 Data Line Analyzer monitors all analog transmission parameters within the frequency range of 20 Hz to 20 kHz. It is a copper test set for lines carrying low rate data services used by military and civil services. The ELA 10 Data Line Analyzer is the successor of the Wandel & Goltermann (W&G) DLA-9.
ELQ2-DT xDSL Line Qualifier: For prequalification, installation, and maintenance of balanced copper pairs.
Environmental Test System (OCETS Plus): JDSU Environmental Test Systems are integrated automated test facilities intended for long-term reliability testing of optical components while subjected to environmental stress conditions in a temperature/humidity chamber.
EST-125 and EDT-135 E1 Data Testers: Scalable solutions for E1 and data circuits as well as service testing.
ETDR-10 Cable Fault Locator: For fast and accurate discontinuity location of balanced telecommunications cables.
Ethernet Network Interface Devices (EtherNID™ EE, OE and GE): Implements a standards-based OAM and loop-back capability. Providing a Performance Assurance Agent (PAA) allows measuring and tracking End-to-End SLA parameters such as Latency, Jitter, Packet Loss and Availability in a continuous manner, while the service is running.
ETT-10 Telephone and Exchange Tester: For testing subscriber lines, exchanges, and PABXs. Also tests subscriber telephone sets and other terminal equipment such as fax machines and meter pulse counters.
Extended Warranty: Eliminates unexpected expenses associated with repairs by extending coverage beyond the standard warranty. Warranties can be prorated to align warranty expiration and simplify renewal.

Top of Page

F

Factory Calibration Services: Provides ISO-certified calibration. Factory calibration services install ECNs.
Factory Repair: Either flat-rate pricing or time-and-materials pricing is available. Factory repair services install ECNs.
Falco-300: Falco is the industry's first monitor test platform designed to offer access to SDH/SONET and Gigabit Ethernet backbone by traditional WAN and LAN equipment.
FDM-100 Field Data Management Software: A client software application that supports the DSAM family of test instruments.
FI-10 and FI-11 Optical Fiber Identifier: Identify optical fibers by detecting the optical signals being transmitted through a singlemode fiber.
Fiber Characterization Service: A complete end-to-end fiber characterization test and consulting service for carriers and enterprises measuring overall fiber quality.
FIMAS Post-processing System for Reporting and Analysis: FIMAS - Post-processing system for reports & analysis for 2G, 2.5G and 3G wireless networks
FIREBERD 6000 Communications Analyzer: Advanced testing capabilities for today's networks.
FIREBERD 8000: TestPad datacom analysis module with a variety of interfaces that support installation, troubleshooting and maintenance of network elements and circuits
Flexible Small Channel Count Switch Module: The SQ Series fiberoptic switch is ideal for applications requiring high optical performance in latching or non-latching applications.
Fortissimo/Allegro Call Generators and QoS Analyzers: The world's smallest, full-featured network load generation product for testing and qualifying voice and packet (VoP) networks based on POTS, PBX, ISDN, GSM, soft switches, and media gateways.
FST-2000 TestPad (Version 6 UIM): The latest TestPad platform development providing process improvement and back-office integration.
FST-2207 TestPad: Handheld PCS-1900 GSM test set.
FST-2209 TestPad: Handheld DS3, DS1, and DS0 test set with touch-screen interface.
FST-2230 TestPad: Expert 2M WAN service testing and troubleshooting in a handheld instrument.
FST-2310 TestPad: The industry's first DS1 to OC-48 handheld, battery-operated, and integrated SONET test set.
FST-2802 TestPad: A handheld gigabit Ethernet test instrument designed to meet the needs of service providers offering various Ethernet and Fibre Channel services.

Top of Page

H

High Port Asymmetric Optical Switch Tray (HPA): HPA is ideal for test and network monitoring applications, it has been designed for use in core, access and PON networks.
HST-3000 Handheld Services Tester: In one lightweight, robust, battery operated tester, the HST-3000 offers more testing power than any other handheld tester on the market. Its scalable, modular design cost-effectively addresses today's needs and allows upgrade later in the field to meet emerging requirements, through plug-in hardware modules and software options.

Top of Page

I

IBT-100, IBT-200, and IBT-300 ISDN Testers: ISDN, BRA, PRA, and BRA/PRA testers for the installation and maintenance of basic and primary rate accesses, PBXs, and private PBX networks.
IBT-5 ISDN BRA Tester: ISDN S/T tester for the installation and commissioning of ISDN accesses and equipment.
IL/ORL Plug-In Module for T-BERD/MTS Platforms: The OFI Multifunction Loss Test Module provides automated bi-directional loss test set for continuity check, fiber loss, return loss and length for transport, metro, access, and FTTx/PON networks.
Instrument Tracking and Management: JDSU will inventory the customer's equipment, manage the information in a database, and provide information regarding when the equipment is due for calibration or an upgrade. Recommendations are based on the customer's applications.
Iris-300: High density non blocking timeslot matrix switch designed to work jointly with monitoring equipment such as Protocol Analyzers or Probes. Any timeslot of the incoming E1 signal can be switched to any of the output timeslot available. Broadcasting An incoming timeslot can also be duplicated onto several outgoing timeslots.
ISDNpartner Expert System: ISDN Expert System dedicated to the troubleshooting and maintenance of ISDN installations including access, equipment, and private networks.
ISS-5116 Input Selector Switch: The ISS-5116 Input Selector Switch is designed to support the RSAM-5600. The ISS-5116 is a 16x1 5-1000MHz, 75 Ohm, RF input switch that is directly controlled by the RSAM-5600 to provide the ability to monitor up 128 different testpoints.

Top of Page

L

LanRoamerPRO™ Cable Tester: Network cabling tester identifies length and multiple faults clearly without interpretation. Clear wiremapping is displayed on two-line, 16-character LCD display.
LanRoamer™ Cable Tester: This smart tester offers a new price/performance level for verification of wiring faults and configurations on data cable.
LanScaperPRO™ Network Tester: Perform network testing functions including port discovery, PoE test, ping, hub flash, CDP and high-end cable testing including length measurement. Monitor and correct network problems associated with the physical layer and link conditions of the network.
LanScaper™ Network Tester: Perform physical layer network management with the functions of a high-end cable tester and length measurement device plus the capability to monitor and correct network problems associated with the physical layer and link conditions of the network.
Large Channel Count Switch Module: JDSU modular 1xN controllable switches are designed to connect a single optical channel to any of N channels.
Latch-Test™ Security Alarm Tone Generator: A combination advanced tone generator and continuity tester for sensors, switches, and circuits used in security/alarm systems
Lil' Buttie Butt-In Telephone Test Set: Identify POTS dial tone.
Lil' Buttie Pro Butt-In Telephone Test Set: Identify POTS dial tone and see Caller ID
Lil' Buttie™ Ranger Butt-In Telephone Test Set: Identify POTS dial tone with our line of butt-in telephone test sets. Choose the Lil' Buttie Ranger butt set for the most features and functionality.

Top of Page

M

MAP Broadband Source: The MAP Broadband Source cassette combines the optical performance of the JDSU BBS Series benchtop instrument with the flexibility and modularity of the MAP.
MAP DFB Laser: The MAP Distributed Feedback (DFB) Laser Cassette is an excellent source for DWDM system testing. A combination of DFB lasers may be used to create an ITU grid in which optical frequency represented by a DFB laser corresponds to the transmitter in the optical network.
MAP DFB Laser - Analog Modulation: The MAP DFB Laser Cassette with Analog Modulation is intended for application in analog amplitude modulation.
MAP Erbium-Doped Fiber Amplifier: The MAP EDFA (erbium doped fiber amplifier) cassette combines the optical performance of the JDSU OAB benchtop portfolio, with the flexibility and modularity of the MAP.
MAP Fabry-Perot Laser: The JDSU MAP Fabry-Perot Laser Cassette is designed to produce a stable light source at desired wavelength.
MAP Large Channel Count Switch: The MAP Stepper-Motor Based Switch Cassettes are bidirectional and allow the connection of a common port to any number of channels up to 50.
MAP Light Emitting Diode Source: The JDSU MAP LED Source Cassette is a high-power LED (Light Emitting Diode) based light source with variable output power.
MAP Polarization Controller: The MAP Polarization Controller Cassette provides an efficient and precise way of creating any state of polarization.
MAP Power Meter: The MAP Power Meter Cassette makes use of a 3 mm InGaAs detector that can measure from 10 to - 80 dBm over the wavelength range of 800 - 1650 nm.
MAP RF Switch: The MAP RF switch cassette is a 50 ohm coaxial switch for routing RF and microwave signals at frequencies up to 26.5 GHz.
MAP Small Channel Count Switch: The JDSU Multiple Application Platform (MAP) Prism Based Switch Cassettes are low-cost switch cassettes that can accommodate a number of switches with varying channel counts and latching modes.
MAP Tunable Grating Filter: The MAP TB3 Tunable Grating Filter is a tunable bandpass filter that offers continuous wavelength tuning from 1420 to 1630 nm.
MAP Tunable Laser: The MAP Tunable Laser Cassette is an external cavity tunable diode laser that offers exceptional speed, accuracy and flexibility at a competitive price, making it the ideal source for advanced fiberoptic systems and component testing.
MAP Utility: The MAP Utility Cassette is designed to simplify the mechanical integration of passive optical components for test sets.
MAP Variable Backreflector: The JDSU MAP Variable Backreflector Cassette provides precise levels of return loss to transmitters, which allows measurements of system sensitivity or system degradation as a function of backreflection.
MAP Variable Optical Attenuator: The MAP Variable Optical Attenuator is a high-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.
Modular Adapters: Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.
MS-1200, MS-1300, and MS-1400 MicroStealth Signal Level Meters: A full line of analog and digital testing signal level meters designed for installers who are troubleshooting advanced networks.
MTS-6000 Compact Optical Test Platform: The MTS-6000 is a compact and lightweight test platform designed for the installation and maintenance of fiber networks. It can perform full fiber characterization measurements.
MTS-6000 LITE Compact OTDR: A simple, fast and compact OTDR for FTTx , PON and Access networks.
MTS-8000 40G Transport Module: With the addition of the 40G Transport module, the award-winning T-BERD/MTS-8000 platform provides the market's most complete service installation and maintenance test solution by addressing all fiber characterization, optical spectrum analysis, service verification, and troubleshooting needs, from 1.5M up to 40G, in one platform.
MTS-8000 NewGen 2.5 SDH/SONET Module: The full featured all in one tool for testing Ethernet transported over SDH / SONET networks using GFP, virtual concatenation and LCAS.
MTS-8000 Scalable Optical Test Platform: Completely scalable optical test platform for optical network installation, commissioning, maintenance, and troubleshooting.
MTS-8000 Tester (Transport Module): The MTS-8000 Transport module enables service providers to rapidly, reliably and cost-effectively deploy Transmission services in one convenient package. An important complement to the existing MTS-8000 product line, the module supports T1-10 G SONET/SDH, 10/100/Gig Ethernet, 10Gig Ethernet LAN/WAN PHY, IP, Fibre Channel and OTN and PDH/SDH/SONET/OTN Jitter and Wander testing in the industry's most innovative test module.
Multichannel Backreflection Meter (RX Series): The JDSU Multichannel Backreflection Meters perform a wide range of single-mode or multimode return loss (RL) and loss measurement functions, ranging from single component testing to automated multifiber testing.
Multimaster G7104A: Multimaster G7104A for wireless base stations and repeaters
Multiple Application Platform (MAP): Flexible instrumentation platform for optical or electro-optical test and measurement applications
MVP-200 (MPEG Video Probe): The DTS MVP-200 (MPEG Video Probe) is a rack mounted remote accessible MPEG analyzer that utilizes the same powerful analysis engine as the DTS-330. The MVP-200 allows operators to “wrap the edge” at the video head-end location where MPEG programs are routed over IP and modified in a variety of ways; Digital Program Insertion (DPI), ad splicing, rate shaping, grooming, remuxing, encryption and finally modulation to QAM. Simultaneous analysis of MPEG Programs over Gigabit Ethernet, QAM and ASI is achieved through the industry leading DTS analysis engine, allowing users to monitor the health of the MPEG programs across the edge. Complete real-time analysis is available at any point, enabling comprehensive remote troubleshooting on demand.

Top of Page

N

NetAnalyst Test Management Software: Client/server test management OSS software that controls remote test probes/units for testing your entire network. Enables test automation and provides a secure, managed platform for centralized testing of private line, data and triple-play services.
NetComplete™ Service Assurance for Cable VoIP: JDSU's NetComplete cable voice service assurance solution is an integrated comprehensive system for managing voice services over a packet based cable network. In addition, it provides unparelleled visibilty into the end user experience.
NetComplete™ Service Assurance for IPTV/Digital Video: Service Assurance Solutions provide best-in-class business solutions to the service provider concerned with effectively managing the next generation network and triple play services life cycle.
NetComplete™ Service Assurance for Metro Ethernet: NetComplete Metro Ethernet Service Assurance solution eliminates the Ethernet provisioning verification and troubleshooting challenges facing service providers today.
NetComplete™ Service Assurance for Telco VoIP: NetComplete VoIP Service Assurance Solution delivers an end-to-end solution for service turn-up verification, fault isolation and troubleshooting, performance management, and capacity planning.
NetComplete™ Service Assurance for Wireless (RCATS): For wireless service providers who need to assure efficient service turn-up, troubleshooting, and performance management of subscriber services while minimizing field dispatches and trouble tickets.
NetComplete™ Service Assurance for xDSL: The JDSU NetComplete Service Assurance Solution for xDSL delivers a comprehensive end-to-end system for commissioning, troubleshooting and managing xDSL services. Targeted at service providers who need to support the life cycle of xDSL Services (Pre-Qualification, Turn-Up/ commissioning, Spectrum Management, Narrowband and Wideband Copper test and xDSL Service Test)
NetOptimize® Performance Management Operations Support System: Operations Support System that provides data collection, processing, analysis, and reporting to support triple-play performance management and capacity planning.
Net-Rite™ Continuity and Wiremap Tester: Detect and troubleshoot faults and miswires in network cable.
Network Synchronization Equipment: Symmetricom designs, manufactures, and markets atomic clocks as well as network synchronization and timing solutions used in wireline and wireless telecommunications networks; space, defense, and avionics systems; and enterprise IT networks.

Top of Page

O

OAM-200 Optical Amplifier Module: The simple, easy-to-use solution for amplifying test signals.
Observer RPM (Remote Program Monitor): The Observer RPM (Remote Program Monitor) is Volicon's solution for MSOs, Independent Cable operators, IPTV, and Satellite providers looking to automatically evaluate the quality of their NOC/headend and remote hub site broadcasts from a central location.
OCC-56 Optical Channel Checker: Compact and low-cost test solution for installation, maintenance and upgrades of DWDM networks.
OCK-10 Optical Cleaning Kit for SMART Optical Handhelds: JDSU OCK-10 optical cleaning kit for connector cleaning and maintenance designed for the JDSU SMART optical handhelds range.
OFI-2000 Multifunction Loss Test Set: For the installation and maintenance of fiber optic networks.
OFM-500 Optical Fiber Mapping Software: A complete software application for the design, documentation, and maintenance of fiber optic outside plant facilities. Part of the ONMS family.
OFS-100 Optical FiberTrace Software and OFS-110 Free Viewer: PC software for OTDR trace analysis.
OFS-200 Optical Fiber Cable Software: Software for the MTS tester family
OFS-310 Optical Fiber Budget Software for the OFI-2000: The easiest way to generate bi-directional insertion loss reports.
OFS-355 SMART Optical Reporting Software: SMART Optical Software to speed up your test results reporting in the field!
OIM-400 Optical Inspection Miscroscope: Handheld inspection microscopes that utilizes a white LED for coaxial illumination.
OLA-54 and OLA-55 SMART Optical Level Attenuators: Future-proof, improved instruments for system testing, installation, maintenance, and production of singlemode fibers. These instruments are 40 Gbps ready due to low Differential Group Delay (DGD).
OLA-55M SMART Motorized Optical Level Attenuator: A variable optical attenuator with an automatic level controller mode in a single, rugged, handheld instrument.
OLP-5, OLP-6, and OLP-8 Pocket-Sized Optical Power Meters: Optical handheld instruments designed for optical system installation, maintenance, and troubleshooting applications.
OLP-55 and OLP-57 SMART Optical Power Meters: Designed for installing, testing, and maintaining singlemode and multimode networks and cables. The SMART Optical Power Meters define a new industry standard with a unique built-in auto-zeroing function for auto dark current compensation.
OLS-5 Optical LED Source and OLS-6 Optical Laser Source: For installing and maintaining multimode (OLS-5) datacomm networks and LANs as well as for maintaining and repairing singlemode (OLS-6) fibers in communications, telecommunications, and CATV-multimedia networks.
OLS-55 and OLS-56 SMART Optical Laser Sources: Designed to suit every application from PON to Gigabit Ethernet. These handheld laser sources offer the flexibility to test, install, and maintain singlemode and multimode fiber optic networks.
OLT-55 SMART Optical Loss Test Set: The OLT-55 SMART Optical Loss Test Set is a universal instrument for singlemode fibers from lab through to installation, maintenance and troubleshooting.
On-site Calibration for Communications Test Equipment: ISO-9001 and 9002 calibration service for JDSU and OEM equipment including electrical, optical and data/IP test instruments
On-Site Testing Services: Fiber characterization, fiber qualification, functional testing, burn-in testing, and jitter/wander measurements are some of the tests that we perform for customers. JSDU, a manufacturer of communication test equipment, provides third-party independent testing with expertise, short lead-times, and excellent reports for a competitive price.
On-Site Training: Provides training for eight students at a customer-specified location. Courses cover technology and applications for the specified technology or product.
ONT 40/43G: The ONT-40/43G solution supports testing and verification for new high-speed network elements up to 43 Gb/s. It allows the evaluation of the physical layer, including jitter and wander, at bit rates of 40/43G with unframed signal and framed signals for SDH/SONET/OTN. Function and conformance testing are also provided for the transport layer.
ONT DSn/PDH Single/Dual Port: The DSn/PDH solution addresses the need of R&D and SVT labs to test boards and systems with combined transport technology and DSn/PDH services. It provides testing functionality for T-carrier and E-carrier signals including multiplex chains.
ONT Ethernet: Addresses the need for evaluating fully interworking New Generation SONET/SDH with Ethernet services at electrical and optical interfaces.
ONT G.709 OTN: Provides full functionality for system verification of G.709 equipment, including extensive FEC testing.
ONT High-Accuracy Jitter/Wander: Enables jitter and wander generation and analysis of 155 Mb/s to 10 Gb/s SONET/SDH, 2.7 Gp/s and 10.7 Gb/s OTN (G.709) signals according to ITU-T jitter/wander standards O.172/O.173.
ONT Module-E 10G Electrical Interfaces: The hardware option provides high voltage differential electrical interfaces for 10G clock and data. It allows the test of XFPs, SFP+ with test boards as well as high load multiple receivers in production.
ONT Module-E 10G LAN/WAN/OTN: Module-E addresses the needs of R&D and SVT labs to test boards and systems with combined transport and data technology. It supports 10GigE LAN and WAN with Ethernet and IP traffic even mapped into OTU2 G.709 and OTU2 overclocked.
ONT Module-E 10G OTN: The OTN options of Module-E address standard G.709 and overclocked OTU2 rates with different clients: BULK, Layer 1 Ethernet and Fiber Channel and Layer 2/3 10GigE.
ONT Module-E 10G SDH/SONET and Multi-Channel: Module-E supports SDH and SONET with STM-64c/OC-192c BERT. With the additional Multi-Channel option it analyzes up to 192x STS-1/ 64x AU-3/4 channels simultaneously. Additional mixed mappings allow any combination of concatenated mappings down to STS-1/AU-3/4.
ONT Multi-Channel: The MultiChannel board in combination with 2.5G and 10G boards allows the generation and analysis of up to 1000 simultaneous VC-12/VT1.5 channels in 2.5 and 10 Gb/s signals.
ONT NewGen EoS: The industry's first fully functional Ethernet over SONET/SDH test solution, including Virtual Concatenation (VC) with LCAS emulation, Generic Frame Procedure (GFP), and Ethernet MAC frames.
ONT SONET/SDH: SONET/SDH modules from JDSU offer the highest degree of flexibility when looking for multi-port applications.
ONT-50 Optical Network Tester: Provides optical and digital transport testing in one portable mainframe. It is optimized for early adaptation of new technologies including OTN G.709 and Ethernet over SONET/SDH.
ONT-503 Optical Network Tester: The versatile ONT-503 allows to integrate all modules available for the ONT-5xx family. Its form-factor and the breadth of demanding test applications for e.g. 40/43G, Carrier Ethernet and Multichannel makes it the test set of choice for system verification groups and early deployers at Network Manufacturers' as well as Providers' companies.
ONT-506 Optical Network Tester: 40 Gbps is the next natural data rate to become commercially deployed. Along with it the 43 Gbps OTN technology with its long-reach advantages becomes of interest for manufacturers and carriers.
ONT-512 Optical Network Tester: ONT-512 Provides multi-channel test and multi-port configuration capabilities. It is the answer to the manufacturer's development and system verification. Thus it represents the most complete transport technology testing solution.
OPERA Voice Quality Analyzer: The OPERA Voice/Audio Quality Analyzer represents the latest developments to objectively evaluate and assure the quality of compressed voice and wide-band audio signals, based on modeling the human ear.
Optical Accessories: A complete line of accessories including cases, bags, power supplies, adapters, complementary software, visual fault locators, fiber identifiers, cleaning kits, and fiber inspection microscopes.
Optical Dispersion Module for T-BERD/MTS Platforms: The smallest and most compact plug-in module combining PMD, CD and Attenuation Profile (AP) measurements.
Optical Handheld Family of Test Instruments: A family of future-proof optical handheld instruments that are ready for the industry's newest applications including FTTx, CWDM, DWDM, 40 Gbps, Ethernet and Gigabit Ethernet.
Optical Level Attenuators: JDSU offers a complete line of optical level attenuators for every field application.
Optical Network Management System (ONMS): The optical network performance and monitoring system that keeps the network on target 24 hours a day.
Optical Power Meters: JDSU offers a complete line of optical power meters for every field application.
Optical Spectrum Analyzers (OSA) for WDM and ROADM Testing: Full range of OSAs tailored for spectral measurements in CWDM systems in the access network as well as DWDM systems in high-speed backbone networks with datarates up to 40Gbps or 100Gbps. The range features an OSA for testing ROADM-based systems, providing true OSNR measurements based on JDSU’s unique in-band OSNR method.
Optical Switch Module (OSM): The Polatis OSM family is a range of fully non-blocking optical switch modules designed for OEM integration.
Optical Switch Tray (OST) Multimode: The Polatis OST family of multimode optical switch trays utilizes the DirectLight beam-steering technology, delivering high performance in a compact, fully non-blocking, multimode product.
Optical Switch Tray (OST) Single Mode: The Polatis OST family is a range of fully non-blocking optical switch units designed for 19" ANSI and ETSI rack equipment practice.
Optical Test Kits: A complete line of optical test kits that contain all of the instruments and accessories necessary to perform professional-grade power and loss testing in the field.
ORL-55 SMART Optical Return Loss Meter: The ORL-55 is a high performance instrument for field, production and lab use. This instrument can be used in three different modes as a return loss meter, optical power and loss meter and a laser source.
OTDR Plug-In Modules for T-BERD/MTS Platforms: Wide product line of field interchangeable OTDR plug-ins, covering both multimode and singlemode networks, from very short distance to ultra long haul at any wavelength: 850,1300,1310,1383,1490,1550 and 1625 nm.
OTS-55 Optical Talk Set: The OTS-55 Optical Talk Set provides clear digital voice transmission over a single fiber. Hands free operation makes communication even more convenient for the technician by using either a headset or the "speaker phone" mode.
OTU-8000 Optical Test Unit for the ONMS: JDSU OTU-8000 Optical Test Unit for the ONMS Rack-based optical test unit for RFTS (Remote Fiber Test System)
Outsourced Calibration Services: A complete solution for all of your calibration needs.
OVF-1 Visual Fault Locator: For fault location in fiber optics networks.
OVIP-250/OVIP-400 Video Inspection Probes: For the inspection of fiber optic terminations.

Top of Page

P

PA-25 and PFA-35 E1 and Data Testers: A full product line of field service testers for installing, commissioning, and maintaining E1 and data circuits as well as associated services.
PathTrak Return Path Monitoring System: Simultaneous return path monitoring, live remote client spectrum views, constant performance history, and remote spectrum views on field meters
PathTrak WebView Server: PathTrak WebView™ software allows remote access to the live spectrum analyzer, to performance history reports and automates the node certification process allowing operators to prioritize their workforce more efficiently. WebView is a PathTrak™ HFC Test & Monitoring Solution.
PCM-40 PCM Channel Analyzer: PCM channel analyzer for CODEC and line card tests.
PCS-40 Channel Selector: By interconnecting the PCS-40 PCM Channel Selector with the PCM-40 PCM Channel Analyzer and the analog terminal of a PCM multiplex unit, a test system is established to automatically and rapidly measure a wide range of parameters of the device under test.
Plan-Um® AP Cabling Project Management Software: Makes every structured cabling installation more professional and profitable.
PMD Plug-In Modules for T-BERD/MTS Platforms: Provide fast and cost-effective polarization mode dispersion (PMD) testing for Metro DWDM network testing.
Product Support Services: Services performed after the customer purchases JDSU test instruments. Designed to ensure proper functionality, extend the life, and reduce the total cost of ownership of the test instruments.
PS-33A Level Generator: Level generator for testing from 50 Hz to 2 MHz.
Public Training: Provides training for individuals and small groups of students from various companies at a JDSU-specified location. Courses cover technology and applications for the specified technology or product.
PVA-1000 VoIP Network Analysis Suite: VoIP/IMS analysis software and remote software capture agents

Top of Page

Q

QT-200 xDSL & Triple-Play Probe: The QT-200 xDSL and Triple-Play probe provides an unsurpassed ability to pre-qualify, provision, maintain, monitor, and troubleshoot DSL triple-play services as well as copper loop and POTS lines.
QT-50 Software Agent: An integral part of the JDSU NetComplete^TM Service Assurance VoIP portfolio, the QT-50 addresses service providers' needs for proactively monitoring and troubleshooting quality of service (QoS) issues experienced at the customer premises.
QT-600 Ethernet & Triple-Play Probe: The QT-600 is a distributed probe targeted at addressing service provider's needs to deliver and guarantee service level performance for VoIP, IPTV and data. The QT-600 uses an affordable distributed approach to provide a total service assurance solution for service turn-up verification, fault isolation, and active and passive performance management.

Top of Page

R

RCATS Managed Services: Enables wireless service providers to assess in real-time the quality and performance experienced by end users for voice, messaging and data services.
RCATS QoS Management Systems: For wireless service providers who need to assure efficient service turn-up, troubleshooting, and performance management of subscriber services while minimizing field dispatches and trouble tickets.
RCATS Remote Test Probes: For wireless operators who need to actively monitor and improve the quality of services they deliver to their end customers.
RCATS Services Validations Packages: For wireless service providers who need to actively monitor and improve the quality of services they deliver to their end customers.
Re-Certification for Instrument Change of Ownership: For instrument certification and warrenty coverage when it changes ownership.
Repair Services: Either flat-rate pricing or time-and-materials pricing is available. Factory repair services install ECNs.
Resi-Talker™ Butt-In Telephone Test Set: Identify POTS dial tone with most economical butt set.
Resi-Tester™ Cable Tester: Perform essential physical cabling tests and wiring verification.
Resi-Toner™ Tone Generator: A full-function tone generator with unique features designed to further test connections on telephone systems and speaker installations. Find your outlets and assure your connections.
Resi-Tracer™ Probe: Unique features for tracing telephone, network, coax, and audio cable with special functions for finding and phasing speakers and testing telephone systems.
RF Modeler: DVB-T/H Modulator and Multipath Fading Simulator. Provides multiple echo builder and noise generator.
RSAM-5600 Remote Service Analyzer Module: For QAM and Analog RF testing, including MER, BER, and level. Also provides remote analysis of CATV forward path systems.
Ruggedized Small Channel Count Switch Module: The JDSU Ruggedized Small Channel Count Switch Module (SR series) is used for incorporating customized test assemblies and specialized applications operating multiple source measurement instruments, such as optical spectrum analyzers, wavelength meters, and power meters. Both singlemode and multimode versions of the SR Series switch connect optical channels by redirecting optical signal into a selected output fiber.

Top of Page

S

Satellite Signal Strength Meter: This signal strength meter is a simple mechanical device used to maximize a satellite signal between the LNB amplifier and the receiver.
SDA-4040D Stealth Digital Analyzer: Delivers precision "find and fix" measurement tools that will reduce critical test time when analyzing and qualifying broadband performance.
SDA-5000 Stealth Digital Analyzer: RF sweep receiver with digital and analog signal analysis for broadband cable networks.
Sectionalizer Fault Isolation Software: Software that, when combined with the T3AS Test and Performance Monitoring System, allows service providers to quickly pinpoint where faults occur.
Service ValuePak for Instruments: Comprehensive, lifetime support for all of your JDSU instruments.
Service ValuePak for Systems: Offers initial and ongoing support that encompasses the entire life cycle of JDSU systems products.
Single Source Repair: Complete instrument repair services for all of your test instruments. We offer a single solution that handles all logistical, technical, and accounting activities.
SITT-GGSN Scalable Intensive Test Tool: SITT-GGSN provides mobile network operators with an easy-to-use, scalable tool for load testing and background load generation for GGSNs, with special focus on real end user application types (http, wap, mms, ftp, streaming, etc), RADIUS integration and CDR validation.
SITT-IMS Scalable Intensive Test Tool: Cost-effective and easy-to-use traffic load test generator, ideally suited for load testing IMS networks with up to 500,000 users in less than 30 minutes. It ensures a risk-free introduction of network changes and upgrades.
SITT-SGSN Scalable Intensive Test Tool: SITT-SGSN provides mobile network operators with an easy-to-use, scalable tool for load testing and background load generation for SGSNs and GGSNs, with special focus on call control and mobility signaling.
Small Channel Count Switch Module: JDSU Prism Based Switch Modules are ideal for incorporation into customized test assemblies and switch modules.
SmartClass ADSL: ADSL1/2/2+ services installation and maintenance tool for field engineers
SmartClass E1 Tester: The JDSU SmartClass E1, the latest member of the SmartClass product family, addresses today's E1 Service Testing demands.
SmartClass Ethernet: Easy to use, cost effective Ethernet testing solution for basic physical layer cable testing, layer 2 and layer 3 traffic generation, and full RFC 2544 testing.
Speaker Seeker™ Wiremapping Tester: Perform wiremapping of speaker, security/alarm wire, and coax.
SPM-32A, SPM-33A, SPM-35A, and SPM-36A Selective Level Meters: Selective level meters (50 Hz to 620 kHz, 2 MHz, or 3.5 MHz) for conformance testing on digital interfaces.
StealthWare: Data analysis software for advanced analysis, reporting, printing, and archiving of test results.
Swept Wavelength Systems (SWS2000 and OMNI Expansion Series): SWS2000 is a fast, accurate and flexible test solution for characterizing the wavelength dependence of passive optical components. The SWS system consists of: a tunable laser source, a source optics module, a receiver chassis, a control module, one or more detector modules and application software.
SystemCare Center Support Engineer: An assigned system engineer provides on-site support, including supplemental hands-on training, operational process improvement, enhanced technical support, system administration support, and on-site repair.
SystemCare Deployment Services: Full installation, integration, configuration, and program management services ensure effective implementation of JDSU systems.
SystemCare Expedited Module Hardware Sparing Support: When TAC diagnoses a module failure, a new module is shipped out overnight prior to receiving the broken module.
SystemCare Extended Technical Assistance Center (TAC) Support: Toll-free hotline 24/7 support and on-site support, if necessary, to resolve a system problem.
SystemCare Inventory/Configuration Check and System Usage Reports: Get a better understanding of what you have deployed in your network using a Site Configuration Report to summarize the status of each site.
SystemCare Remote Software Upgrades: From a centralized, remote location, elements are upgraded throughout your test system.
SystemCare Software Enhancement Agreement: Keep up-to-date with the latest software by automatically receiving all software releases, including corrections and enhancement releases.
SystemCare System Management: A modular service plan to keep your networks up and running at full capacity.
SystemCare System Training: Operators and system administrators become comfortable with their system, and they are able to use the system to its fullest capacity.

Top of Page

T

T3AS Test and Performance Monitoring System: In-line remote testing and monitoring system for DS3, DS1, and DS0 circuits at sites where digital cross-connect systems (DCS) are not located.
Talk & Trace™ Communication and Tracing Device: Hands-free personal communications set that can be used in any wiring environment.
T-BERD 6000 Compact Optical Test Platform: Compact and lightweight test platform designed for the installation and maintenance of fiber networks. It can perform full fiber characterization measurements.
T-BERD 6000 LITE Compact OTDR: A simple, fast and compact OTDR for FTTx , PON and Access networks.
T-BERD 8000 (Transport Module): The T-BERD 8000 Transport module enables service providers to rapidly, reliably and cost-effectively deploy Transmission services in one convenient package. An important complement to the existing T-BERD 8000 product line, the module supports T1-10 G SONET/SDH, 10/100/Gig Ethernet, 10Gig Ethernet LAN/WAN PHY, IP, Fibre Channel and OTN and PDH/SONET/OTN Jitter testing in the industry's most innovative test module.
T-BERD 8000 40G Transport Module: With the addition of the 40G Transport module, the award-winning T-BERD/MTS-8000 platform provides the market's most complete service installation and maintenance test solution by addressing all fiber characterization, optical spectrum analysis, service verification, and troubleshooting needs, from 1.5M up to 40G, in one platform.
T-BERD 8000 NewGen 2.5 SONET/SDH Module: The full featured all in one tool for testing Ethernet transported over SONET / SDH networks using GFP, virtual concatenation and LCAS.
T-BERD 8000 Scalable Optical Test Platform: Completely scalable optical test platform for optical network installation, commissioning, maintenance, and troubleshooting.
TechComplete Home Certification Testing Solution: Empowers cable operators to increase customer satisfaction by utilizing cutomized, automated testing procedures to significantly reduce repeat service calls and increase productivity.
TechComplete™ Test Productivity Pack: Software for maintaining and optimizing your DSAM meters. Provides Field Data Management, Meter Browser Management, and DSAM Remote Access.
Telecom Protocol Analyzer 8631: A highly mobile test solution for troubleshooting and maintenance applications in fixed and mobile network infrastructures. Offers dual E1 receivers through a PCMCIA card. Compatible with the high-end 8630 Telecom Protocol Analyzer.
Telecom Protocol Analyzer 8632: The 8632 is a telecom protocol analyzer that monitors all layers of network installing.
Telecom Protocol Analyzer 8635: Portable protocol analyzer to test all fixed interfaces of mobile radio, access, and SS7 networks.
Telecom Protocol Test System 8619: A portable, fully integrated protocol test system, supporting a wide variety of applications and physical interfaces, including GSM, GPRS, UMTS, VoIP, SS7, ISDN, IN, CDMA, and V5.
Tell-All™ Indicator Phone and Data Line Identifier: Identifies telephone and data lines.
Test and Turn-Up Assistance: Final certification and configuration for customers who prefer to perform installations themselves.
Test Automation Services – Custom Test-Systems: Building custom-test stands for labs and manufacturers, automating testing for field applications, and automating testing and reporting for systems assurance systems are capabilities that we have. JDSU has a comprehensive portfolio of test equipment and our experience allows us to perform custom test automation with a short, fixed schedule and a competitive fixed price.
TestifierPRO™ Cable Tester: Perform essential physical cabling tests and wiring verification including length measurement.
Testifier™ Cable Tester: Perform essential physical cabling tests and wiring verification.
TestPoint 10Gbps: TestPoint 10Gbps module provides traffic generation, analysis and impairments at multiple line rates and multiple technologies on a single port. It is available as a hot swappable module in the TestPoint TS-30/TS-170 chassis. It is also available as a configuration in the TestPoint TS-10 chassis.
TestPoint 1Gbps: TestPoint 1Gbps single slot module provides one or two optical/electrical Gigabit Ethernet or 1G/2G Fibre Channel ports. A licensed option controls whether the unit is equipped with one or two GbE/FC ports. Both ports may be used concurrently. Traffic generation of up to 128 streams is now provided on Gigabit Ethernet.
TestPoint 40Gbps: TestPoint 40Gbps three-slot module fits into both the TS-30 chassis and the TS-170 chassis. It provides SONET/SDH testing at OC-768/STM-256 with PRBS traffic as standard test functionality. The 40Gbps module also offers an option for Digital Wrapper and Forward Error Correction (FEC) support at G.709 OTU3 (43.018 Gbps).
TestPoint Group Controller: TestPoint Group Controller single slot module is optional and connects into slot 0. It provides a single point of test system management access when the TestPoint chassis contains multiple test modules.
TestPoint Multi-Rate: TestPoint Multi-Rate module is a single slot, customizable module where the availability of the following physical ports is controlled via licensed options: OC-48/STM-16, OC-12/3/STM-4/1, Gigabit Ethernet, and 1G/2G Fibre Channel. One physical port can be active at a time for testing. Traffic generation of up to 128 streams is now provided on Gigabit Ethernet.
TestPoint OC-192/STM-64: The TS-10 OC-192/STM-64 configuration provides SONET/SDH test functionality with channelization down to STS-1/VC-3(AU-3). It supports a hardware option for Digital Wrapper and Forward Error Correction (FEC) at G.709 OTU2 (10.709 Gbps).
TestPoint TS-chassis (TS-10, TS-30 and TS-170): TestPoint is a modular platform that provides versatility in configuring interface types, transmission rates, protocols, and port density. One of the TestPoint’s key attributes is support for multiple rates on single It is available in three chassis formats: a lightweight, fixed interface TS-10, a 3-slot TS30, and a 17-slot TS-170. The TS-10 provides a fixed interface configuration. The TS-30 and TS-170 are slot-based and all modules support hot insertion.
TLS-55 SMART Optical Tunable Laser Source: The most compact tunable optical laser source for field applications and designed to support ROADM network channel routing applications.
Tonax™ Coax Tone Generator: Generate tone for cabling identification and troubleshooting, tone through splitters on coax systems.
Tone Generator™: Generate analog tone for cabling identification and troubleshooting.
Tone-Tracer: Receive analog tone for cabling identification and troubleshooting.
Trace-Rite™ Tone Generator and Tone Tracer: High-sensitivity tracer for location of network, telephone, and coax cable. Find wires behind walls, floors, and ceilings.
Tri-Porter™ Premises Wiring Tester for Voice, Data & Video: Test, assure, and perform a full range of vital premises cabling tests with a single groundbreaking tool. The JDSU Tri-Porter replaces up to six instruments–a DSL-safe telephone test set, a network tester, a tone generator, a cable tester/verifier, a tone detector/cable finder with the ability to trace coax through splitters, and a coax mapper–in one lightweight solution.
TSR-37 Rubidium Timing Signal Reference: A low-cost portable timing reference source for telecommunications and metrology test and measurement applications.
Turbo-Tone™ High-Powered Tone Generator: The strongest tone generator offering. Generates as much as 700% more power than standard tone generators.

Top of Page

U

UltraFED: The JDSU UltraFED, with the ability to test copper frequencies up to 30 MHz by a single technician, helps field teams maximize resources by addressing the specific test challenges associated with the pre-qualification and troubleshooting of VDSL and ADSL2+ networks.

Top of Page

V

Validator™ and Validator-NT™ Ethernet System Speed Certifiers: The Validator Ethernet system speed certifier is a tool for Ethernet network installers who need complete physical layer testing, speed validation, and reporting. Validator is also an essential tester for IT professionals needing to troubleshoot an existing Ethernet network.
Virtual Classroom: Provides training for students located at different locations using online tools. Courses focus on technology and applications, and the class is led by an instructor. Both public and single customer courses are available.
VOA and Power Meter Switch (VST): The Polatis VST family of products offers an ideal integration of optical switching, attenuation and power monitoring in a single, compact package.
VoiceLoad H.323/SIP Call Generator: A massive bulk H.323 call generator with a series of powerful features.

Top of Page

W

Windows® PC Detailed Decoder: ISDN PC analyzer for quick and easy troubleshooting on ISDN installations.
Wi-Net Window Wireless Tester: Identify, clarify, and configure all the wireless transmission equipment on a site. Prevent conflicts of internet access over wireless points and give a clear picture of the range and availability of each wireless access point.

Top of Page