PathTrak WebView V2.0
WebView V2.0 for PathTrak is now available. WebView V2.0 server software automatically calculates and ranks the RF upstream performance of your nodes, enabling operators to prioritize their work force and organize more efficiently for finding and fixing network problems fast. PathTrak WebView allows operators to access live spectrum views and generate reports from outside of the corporate LAN network to remotely troubleshoot upstream issues.
You must have the following items to install, run, and use WebView V2.0:
- PathTrak Server - V2.3 Service Pack 5 or higher
- WebView Server software
- WebView license file
- Obtain your permanent or trial WebView license by e-mailing our licensing department.
- HCU Firmware - V2.35 or higher
- RPM1000 Firmware - V2.32 or higher.
RPM2000 Firmware - V1.03 or higher - WebView Client (Web Browser)
- Microsoft® Internet Explorer V6.0 or later
- Adobe® SVG Viewer Plug-in
WebView Server Operating System Requirements:
English Microsoft® Windows® XP SP1 or higher
English Microsoft Windows 2000 Server SP3 or higher
English Microsoft Windows 2003 Server
Server PC requirements for the PathTrak WebView software:
The PathTrak server must be V2.3 Service Pack 5 or higher. One PathTrak WebView server is required per PathTrak server. A link to the latest PathTrak service pack software and Installation/Administration Guide can be found at the link above.
- A dedicated PC is no longer required for the PathTrak WebView V2.0 Server. WebView server software can also be installed on the PathTrak server PC (with minimum server PC requirements).
- WebView server software cannot be installed on the same server PC as the Test Productivity Pack/FDM server software, but it can be installed on the same PC that is running the PathTrak and Test Productivity Pack Client software.
- JDSU recommends dual processors and a minimum of 1 GB of RAM for the server. For more detailed specifications refer to WebView data sheet.
PathTrak V2.3 Service Pack Requirements:
JDSU strongly recommends that customers upgrade their PathTrak Server and Client software version 2.3 to the latest Service Pack which is Service Pack 6.
WebView Server Hard Drive Requirements:
The hard drive size is determined by the amount of data to be collected. Each RPM card requires approximately 5.6 MB of storage space for each day of 15-minute intervals. Multiplying 5.6 MB by the number of days that the data will be kept on hand (purge interval) gives an approximate hard drive size requirement.
For example:
A 31-day purge interval (default setting) with 1 fully loaded HCU1500 (15 cards) requires 2.6 GB of hard drive space.
15 cards x 5.6 MB x 31 days = 2,604,000,000 or 2.6 GB
Ordering Information:
Part Number
1010-00-914
Description
PathTrak WebView V2.0 Software
Contact your local JDSU Sales Representative for pricing information.
Demos:
Customers may request a 90 day trial of WebView V2.0 (one trial per system)
- Customer must provide MAC address of NIC card on server PC, e-mail address, contact name and phone number so that 90 day trial license can be e-mailed to end-user.
- Contact your local Sales Representative to learn more about how to schedule the free 90 day trial of WebView V2.0. Limit of one 90 day trial per system.
PathTrak Technical Support:
JDSU Cable Networks Technical Assistance Center (TAC)
United States: 1-800-428-4424, extension 8350
Worldwide: 1-317-788-9351, extension 8350
catvsupport@jdsu.com
JDSU On-site Optimization Service for PathTrak Monitoring Systems
Get the most out of your PathTrak investment – Optimization services are even more critical for node certification reports PathTrak system and threshold must be configured properly in order to generate accurate node certification reports. JDSU’s on-site PathTrak Optimization Service allows you to tap into the full potential of your PathTrak reverse path performance monitoring system. Partner with JDSU’s PathTrak experts to get the most out of your PathTrak investment.
– Refine your PathTrak configuration for Optimum Performance
– Receive System Administrative refresher training
– Receive comprehensive in-depth PathTrak system training
– Leverage JDSU’s OEM System/Installation Knowledge
– Gain the benefits of Firmware Upgrades and Engineering Change Notices
– Receive in Depth Preventative Maintenance, Troubleshooting & Repair support
– Re-certify system installation and configuration
– Utilize your own customized support agreement