STM-4/OC-12/STM-1/OC-3 LIM (J6810B) (Discontinued)

The STM-4/OC-12/STM-1/OC-3 LIM (J6810B) helps network professionals isolate and resolve network problems quickly on SONET and SDH networks.
Изображение

The STM-4/OC-12/STM-1/OC-3 LIM (J6810B) helps network professionals isolate and resolve network problems quickly on SONET and SDH networks.

  • Can be used with the Network Analyzer - Wireline Protocol Test (J6840), Protocol Analysis Probe - DNA (J6801B) and Protocol Analysis Probe - DNA MX (J6802B) platforms.
  • Hot-swappable - a LIM can be removed safely while an application is running and another LIM inserted in its place; the current application terminates and the user can launch another suitable application for the new LIM without having to power down and restart the analyzer.

Sub-channel analysis capabilities enable analysis and troubleshooting on thousands of trunks and channels from a single Network Analyzer connected to a single test access port.

Directly lower the cost of network maintenance by reducing costly resources:

  • Replace hundreds of DS-1 and DS-3 test access ports with one STM-4/OC-12 test access port
  • Replace multiple analyzers and probes and with one Network Analyzer
  • Reduce the management network require to support multiple analyzers and probes
  • Reduce operations time required to repeatedly connect, configure, re-connect, re-configure test equipment
  • STM-4/OC-12/STM-1/OC-3 LIM (J6810B) Features
  • Dual-rate STM-4/OC-12 (622Mbps) and STM-1/OC-3 (155Mbps) interface connects to SDH and SONET networks
  • 100% full line-rate capture
  • Sub-channel analysis on multiple ATM and WAN technologies, including ISDN
  • ATM and Packet over SONET bulk-rate analysis
  • Real-time AAL-2 and AAL-5 reassembly on up to 4096 virtual channels
  • Full rate cell mode and frame mode ATM generation and ATM Ping at 622 Mb/s and 155 Mb/s
  • Real-time expert analysis, traffic and performance statistics, and protocol decodes
  • Single-mode and multi-mode fiber supported with LC connectors
  • Auto-discovery of the VPI-VCIs of up to 4,096 ATM virtual channels
  • Hardware filtering for capture and analysis based on VPI-VCI
  • Real-time line status and statistics
  • ATM Policing, Traffic Contract Estimation and 1-point CDV on multiple virtual circuits simultaneously
  • Supports new J6828A Four-port STM-1/OC-3 LIM Multiplexer
  • Performs optical power measurements on each optical receiver

Поддержка на каждом этапе работы

Мы оказываем техническую поддержку, предоставляем услуги, программы обучения и все необходимые материалы. Наша деятельность направлена на максимальное повышение отдачи от ваших капиталовложений в систему VIAVI.

Позвольте вам помочь

Мы всегда готовы оказать вам всю необходимую помощь.