RoHS Compliant XFP Optical Transceiver-850 nm for up to 300m Reach (PDF, 0.56 MB)
The JDSU 10 Gb/s 850 nm XFP optical transceiver is a cost-effective, fully duplex, high-reliability optoelectronic (O/E) transceiver that transmits and receives standard compliant high-speed serial 10 Gb/s optical and electrical signals. The JDSU 10 Gb/s XFP optical transceiver provides a single product solution for the IEEE802.3 2005 Clause 52 10GBASE-SR, 10GBASE-SW, and 10GFC optical interconnects that are used in Telecommunication, Data Communication, and Storage Area Network applications. The module complies with the 10 Gigabit Small Form Factor Pluggable (XFP) Multi-Source Agreement (MSA).
The RoHS6/6 compliant XFP optical transceiver features a JDSU 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) and a PIN photodiode. The XFI electrical interface uses 10 Gb/s differential data channels for communications to the module as specifi ed in the 10 Gigabit Small Form Factor Pluggable (XFP) Multi-Source Agreement (MSA). The transceiver’s MSA compliant “hot-z-pluggable” mechanical design provides the system designer a small footprint 10 Gb/s solution and enables high density front-panel designs with up to 16 10G ports per line card. The JDSU 10 Gb/s XFP optical transceiver is a 850 nm wavelength optical transceiver targeted at short reach applications. Link lengths greater than 300 m can be achieved on 2000 MHz•km multimode fiber.
Key Features
- 850 nm optical signals for up to 300 m reach over enhanced multimode fi ber
- Low power consumption (< 1.5 W max)
- 0°C to 70°C case temperature operating range
- 9.95 Gb/s to 10.75 Gb/s serial optical and electrical interface
- Durable plastic bail delatch mechanism
- LC receptacle optical connector
- Bit error rate < 1×10-12
- Excellent EMI performance
- High reliability
- Requires only 3.3 V and 1.8 V power supplies
- Digital Diagnostic Monitoring support
- XFI AC-coupled electrical interface
- Support both line and XFI system loopback
Applications
- Local Area Network (LAN)
- Storage Area Network (SAN)
- 10 Gigabit Ethernet 10GBASE-SR and 10GBASE-SW applications
- 10G Fibre Channel optical interconnects
- Ethernet switches and applications
- Fibre Channel switches and applications
Compliance
- Compliant with XFP MSA INF8077i Rev. 4.5
- RoHS6/6 compliant
- IEEE802.3 2005 Clause 52 standard
- 10 GFC 1200-MX-SN-I standard
- Class 1 Laser Safety
- Tested in accordance with Telcordia GR-468 standard
