LanRoamerPRO™ Cable Tester

LanRoamerPRO Cable Tester (PDF, 0.18 MB)

The LanRoamerPRO™ is a length measurement tool, cable tester, and tone generator in one unit. The LCD, four momentary buttons, single end testing capability, and other features make the LanRoamerPRO an easy-to-use tool for residential, datacom, telecom, and cable contractors and installers.

When testing with a remote identifier, the LanRoamerPRO remains off to extend battery life. The auto-on feature enables display of wiremap, ID, and multiple faults within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected.

The LanRoamerPRO operates in one of four modes. In Test/Pre-test mode, the unit detects and displays shorts, opens, miswires, reversals, and split pairs. If there is no remote, it tests for shorts, splits, and opens. It also displays the PASS icon for T568A/B passing cables. In Length mode, the unit measures length using a proven cable capacitance method. Tone mode generates audio tones for use with tone tracers on all pairs. Finally, Setup mode enables user-selectable options, such as beep-on-PASS or setting length measurements for feet or meters.

Key Features

Measures cable length in feet or meters
Two-line, 16-character alphanumeric LCD with icon flags displays test results in wiremap format
Conducts single-ended tests on shorts, splits, and opens
Auto-on enables test results within 2 seconds
Tests for shorts, opens, miswires, reversals, and split pairs with remote
Includes tone generator

Applications

Installation and maintenance on telco, datacom, and coax cable
Generates wiremap, ID, multiple faults, and PASS results
Measures cable length
Generates tone for tracing
Supports unshielded or shielded twisted pair and coax

	Coax Mapper Tests CATV and security camera coax connections and installations.
	LanRoamer™ Cable Tester Cable tester identifies multiple faults on main and remote unit, initiates tests with Auto-on, and generates tone.
	LanScaper™ Network Tester Network tester detects active devices up to 100 Mb/s, pings, blinks link indicators on remote devices, tests cabling configuration, displays cable length, and generates tones.
	Net-Rite™ Continuity and Wiremap Tester Detect and troubleshoot faults and miswires in network cable.
	Plan-Um® AP Cabling Project Management Software Makes every structured cabling installation more professional and profitable.
	Satellite Signal Strength Meter Simple mechanical device used to maximize a satellite signal between the LNB amplifier and the receiver.
	Speaker Seeker™ Wiremapping Tester Perform wiremapping of speaker, security/alarm wire, and coax.
	Tell-All™ Indicator Phone and Data Line Identifier Identifies telephone and data lines.
	Testifier™ Cable Tester Performs essential physical cabling tests and wiring verification for telco, network, and coax cable; includes tone generator and LCD display.
	Tri-Porter™ Premises Wiring Tester for Voice, Data & Video Triple-Play tester performs the work of multiple tools: DSL-safe butt set, network tester, tone generator, cable tester, tone detector, and coax mapper.
	Validator™ and Validator-NT™ Ethernet System Speed Certifiers Conducts Ethernet speed validation, measures SNR and Skew, verifies wiring configuration, and enables port discovery; Plan-Um software creates layout and documents cable tests.
	Wi-Net Window Wireless Tester Identify, clarify, and configure all wireless transmission equipment on a site; provides a clear picture of the range and availability of each wireless access point.