Wi-Net Window Wireless Tester

Wi-Net Window Wireless Tester (PDF, 0.17 MB)

The Wi-Net Window™ captures and displays essential information regarding identity, functionality, and capability of IEEE 802.11 b and g wireless devices. This wireless network analyzer detects and connects to wireless equipment, reports signal strength, pings Internet protocol (IP) addresses, and identifies network components. The handheld unit shows all detection information needed to determine the wireless environment and parameters of equipment being used in the vicinity of proposed installed components, including signal strength, encryption condition, Internet access capability, channel, service set identification (SSID), and other information.

Advanced ping mode enables access to DHCP of a network to confirm an IP address of a target or DNS component. Multiple pinging of up to four targets is conducted in advanced mode. Full 64- or 128-bit WEP support enables Wi-Net Window to perform ping functions on encrypted wireless access points. The unit is versatile and easy-to-use with a full alphanumeric liquid crystal display (LCD), navigation buttons, and screen prompts.

Key Features

Displays signal strength on LED and as a percentage on the LCD
Actively scans and logs IEEE 802.11 wireless signal types b and g
Detects networks with hidden SSIDs
Displays Internet access capability and encryption status on each wireless component
Identifies the signals as either an access point, ad-hoc, or Twin network type
Pings IP addresses and checks for a viable link to the Internet
Negotiates with network DHCP to identify components and IP/MAC addresses

Applications

Identifies, clarifies, and configures wireless transmission equipment on a site
Prevents conflicts of Internet access over wireless points
Provides a clear picture of the range and availability of each wireless access point

	Coax Mapper Tests CATV and security camera coax connections and installations.
	LanRoamer™ Cable Tester Cable tester identifies multiple faults on main and remote unit, initiates tests with Auto-on, and generates tone.
	LanRoamerPRO™ Cable Tester Cable tester conducts single-ended continuity tests, measures length, and generates tone; results displayed in wiremap format on two-line, 16-character LCD display.
	LanScaper™ Network Tester Network tester detects active devices up to 100 Mb/s, pings, blinks link indicators on remote devices, tests cabling configuration, displays cable length, and generates tones.
	Net-Rite™ Continuity and Wiremap Tester Detect and troubleshoot faults and miswires in network cable.
	Plan-Um® AP Cabling Project Management Software Makes every structured cabling installation more professional and profitable.
	Satellite Signal Strength Meter Simple mechanical device used to maximize a satellite signal between the LNB amplifier and the receiver.
	Speaker Seeker™ Wiremapping Tester Perform wiremapping of speaker, security/alarm wire, and coax.
	Tell-All™ Indicator Phone and Data Line Identifier Identifies telephone and data lines.
	Testifier™ Cable Tester Performs essential physical cabling tests and wiring verification for telco, network, and coax cable; includes tone generator and LCD display.
	Tri-Porter™ Premises Wiring Tester for Voice, Data & Video Triple-Play tester performs the work of multiple tools: DSL-safe butt set, network tester, tone generator, cable tester, tone detector, and coax mapper.
	Validator™ and Validator-NT™ Ethernet System Speed Certifiers Conducts Ethernet speed validation, measures SNR and Skew, verifies wiring configuration, and enables port discovery; Plan-Um software creates layout and documents cable tests.