Validator™ and Validator-NT™ Ethernet System Speed Certifiers

Validator and Validator-NT Ethernet Network Management Tools (PDF, 0.97 MB)

The ValidatorTM series of Ethernet Network Management Tools—Validator and Validator-NTTM—offer a complete solution to test and speed certify the data-carrying capabilities of Ethernet network cables up to 1 Gb/s by testing for noise in the network, detecting faults in the cabling wiring, and ensuring that cables are able to support the speed capabilities of active equipment.

To certify Ethernet speed performance of cable runs, the Validator series handheld testers conduct Bit Error Rate (BER) tests by sending data packets down specified cable runs at defined data rates to check for errors at the maximum throughput of the link. Both Validator and Validator-NT also report on signal quality that can impact high-speed data transmission by measuring signal-to-noise ratio (SNR). Skew measurements report on the signal time delay between pairs that can impact Ethernet data transmission. Finally, the Validator series units provide continuity testing that detects opens, shorts, miswires, split pairs, reversals, and high-resistance faults while accurately measuring distance to faults and total cable length.

The Validator-NT includes a comprehensive set of features to test the active network capabilities of a network: port discovery for speed and capability detection of active devices up to 1 Gb/s; ping test to verify connectivity to IP hosts on or off the local network; and discovery of network devices using Cisco Delivery Protocol (CDP). Cabling Installation and Planning Software Validator and Validator-NT include the powerful Plan-Um® planning and reporting software for planning network architectures and organizing cable information and test results. Plan-Um helps set-up each job, defines scope of the job, aids in testing cable runs, and produces reports for the installer and customer. The Network Tools feature provides a quick way to see the network architecture and a way to document moves, adds, and changes. Used in conjunction with Plan-Um, Validator and Validator-NT provide confidence in the physical properties of cable runs and the overall capability of the network.

JDSU also offers the ValidatorPRO as a complete solution to perform Ethernet speed certification, plus an integrated optical power meter. ValidatorPRO-NT adds PoE testing and wireless 802.11b/g/n PoE testing features.

Key Features

Conducts Bit Error Rate (BER) testing to speed certify Ethernet data transmission speed up to 1000BASE-T (1 Gb/s)
Measures Signal-to-Noise Ratio and Skew to uncover impairments to Ethernet data transmission
Tests for opens, shorts, split pairs, miswires, and reversals and measures distance to opens and shorts—supports all network, telco, and coax cables
Identifies cable termination on active Ethernet ports with hub flash
Performs port discovery to detect advertised Ethernet speed and displays capabilities of network devices (Validator-NT)
Pings network devices to verify connectivity to active equipment (Validator-NT)
Includes Plan-Um® software to create network layout, document cable tests, show network topology, and record moves, adds, and changes

Applications

Verify proper operation of Ethernet cable runs
Certify speed capability of cable runs to support 10/100/1000 Mb/s Ethernet applications
Ensure configuration of and connectivity with active network devices
Document network topology including moves, adds, and changes

	Coax Mapper Tests CATV and security camera coax connections and installations.
	LanRoamer™ Cable Tester Cable tester identifies multiple faults on main and remote unit, initiates tests with Auto-on, and generates tone.
	LanRoamerPRO™ Cable Tester Cable tester conducts single-ended continuity tests, measures length, and generates tone; results displayed in wiremap format on two-line, 16-character LCD display.
	LanScaper™ Network Tester Network tester detects active devices up to 100 Mb/s, pings, blinks link indicators on remote devices, tests cabling configuration, displays cable length, and generates tones.
	Net-Rite™ Continuity and Wiremap Tester Detect and troubleshoot faults and miswires in network cable.
	Plan-Um® AP Cabling Project Management Software Makes every structured cabling installation more professional and profitable.
	Satellite Signal Strength Meter Simple mechanical device used to maximize a satellite signal between the LNB amplifier and the receiver.
	Speaker Seeker™ Wiremapping Tester Perform wiremapping of speaker, security/alarm wire, and coax.
	Tell-All™ Indicator Phone and Data Line Identifier Identifies telephone and data lines.
	Testifier™ Cable Tester Performs essential physical cabling tests and wiring verification for telco, network, and coax cable; includes tone generator and LCD display.
	Tri-Porter™ Premises Wiring Tester for Voice, Data & Video Triple-Play tester performs the work of multiple tools: DSL-safe butt set, network tester, tone generator, cable tester, tone detector, and coax mapper.
	Validator™ and Validator-NT™ Ethernet System Speed Certifiers Conducts Ethernet speed validation, measures SNR and Skew, verifies wiring configuration, and enables port discovery; Plan-Um software creates layout and documents cable tests.
	Wi-Net Window Wireless Tester Identify, clarify, and configure all wireless transmission equipment on a site; provides a clear picture of the range and availability of each wireless access point.