Observer nTAP Optical to Copper Conversion
- Copies traffic from one full-duplex optical link to one copper monitoring device
- Connects to the full-duplex link under test and an analyzer equipped with a dual-receive capture card
- Compatible with network analyzers, security monitoring devices, forensics tools, remote monitoring appliances, and RMON probes
Install Observer Conversion nTAPs on 10 Mb, 100 Mb, or 1 Gb links for quick, anytime access to network traffic. When analyzers and similar monitoring devices communicate over different topologies than the network, Optical-to-Copper or Copper-to-Optical nTAPs bridge the gap. Conversion nTAPs make copies of network data, sending one back to the network and the other out for analysis.
For single-receive devices, Observer Aggregator Conversion nTAPs merge full-duplex links into single streams for transmission to up to two single-receive analysis devices. Industry-leading buffer sizes offer less likelihood of lost packets than SPAN ports to ensure critical traffic reaches analyzers, remote monitoring appliances, and forensics tools.
nTAPs are passive, full-duplex devices, offering complete visibility to monitoring devices regardless of traffic level. They work with the leading management tools for quick and easy deployment. nTAPs are transparent for monitoring critical links, and provide continuous network data flow even if power fails. nTAPs are scalable, modularized, space efficient, and economical.
Place an Optical to Copper nTAP between two devices of interest on a 1Gbps full-duplex optical link. Then attach a 1Gb copper monitoring device to the nTAP. To successfuly analyze the full-duplex output from the TAP, the monitoring device must be equipped with a dual-receive capture card.
Dimensions
| Depth | 7.66 in / 19.46 cm | |||
| Width (faceplate front) | 5.85 in / 14.86 cm | |||
| Width (back) | 4.55 in / 11.56 cm | |||
| Height (faceplate) | 1.10 in / 2.79 cm | |||
Options
| Multimode (62.5 μm) | Multimode (50 μm) | Single-mode (9 μm) |
Optical
Maximum Insertion Losses (dB)
| Split Ratio | Multimode 62.5 μm | Multimode 50 μm | Single-mode 9 μm | ||
| (1300 nm) | (850 nm) | (1300 nm) | (850 nm) | (1310/1550 nm) | |
| 50/50 | 3.9/3.9 dB | 4.7/4.7 dB | 4.5/4.5 dB | 5.5/5.5 dB | 3.6/3.6 dB |
| 60/40 | 3.0/5.0 | 3.8/5.7 | 3.7/5.6 | 4.7/6.6 | 2.8/4.8 |
| 70/30 | 2.3/6.3 | 3.0/7.0 | 2.9/7.0 | 3.9/8.0 | 2.0/6.1 |
Supported Media
| Fiber type | Multimode | Single-mode | ||
| Connector | LC | LC | ||
| Fiber Diameter(s) | 50 μm or 62.5 μm | 9 μm | ||
| Wavelength Ranges (dual window) | 850 nm or 1300 nm | 1310 nm or 1550 nm | ||
Environmental Requirements
| Specification | Operational Range | |||
| Temperature Range (operating) | -40° to 185° (F) / -40° to 85° (C) | |||
| Temperature Range (storage) | -52° to 185° (F) / -47° to 85° (C) | |||
Copper
Supported Media
| Interface | Media | |||
| Link A/Link B (Link under test) | RJ45 | |||
| Copper Analyzer Interface | RJ45 | |||
Environmental Requirements
| Specification | Operational Range | Storage Range |
| Temperature range | 32° to 120°F / 0° to 55 °C | 32° - 167°F / 0° - 75°C |
| Humidity | 35-85% (non-condensating) | |
Power Requirements
| Specification | Measurement/Value | |
| AC Input | 90 V to 264 V, 47 Hz to 63 Hz | |
| Operational Voltage | 5 V (+10% to -5%, < 100 mV ripple) | |
| Operational Current | Typical: <= 1.8 amps | Max: <= 2.8 amps |
| Power Dissipation | Typical: 8 W | Max: 14 W |
Regulatory Compliance
| Specification | Certification | |||
| Emissions | FCC Part 15 Class B | |||
| CE Mark | EN61000-3-2, EN55024, EN55022A | |||
Produits associés
Suivi à chaque étape
Nous assurons l’assistance, les services, des formations complètes ainsi que les ressources qu’il vous faut. Tout cela dans le but de maximiser la valeur de vos investissements VIAVI.
Laissez-nous vous aider
Nous sommes là pour vous aider à prendre une longueur d’avance.