Observer nTAP High Density Optical
The High-Density Optical nTAP can be configured based upon your network needs. Start with just the chassis and a few modules today. Add components as your needs evolve. You can mix and match modules as you like and create any combination of up to 24 modules in one 1U rack.
Features:
- Durable: Rugged aluminum chassis designed exclusively by VIAVI Solutions. No off-the-shelf components.
- Modular: Built to scale. Start with only the modules you need. Add or change modules as you see fit.
- Efficient: The space-saving design optimizes data center usage. Tap up to 24 fiber links inside a 1U rack.
- Versatile: Mix and match speeds, fiber modes, and split ratios needed for your environment..
Use optical nTAPs to send identical copies of critical traffic to network analyzers, remote monitoring appliances, forensics tools, and similar devices capable of supporting dual, non-aggregated data streams. For further flexibility, Observer Copper-to-Optical and Optical-to-Copper Conversion nTAPs are available.
Install the Observer High-Density Optical nTAP (HDOT) 1U rack in your data center. Then insert a module (options include Gb, 10 Gb, 40 Gb, and 100 Gb) into the enclosure between two devices of interest on a full-duplex optical link (each HDOT supports up to 24 modules). Next, attach an optical monitoring device to the module. To successfully analyze the full-duplex link, the monitoring device must be equipped with a dual-receive capture card.
Dimensions
| Rack | Module | |
| Height | 1.73 in / 4.4 cm | 1.57 in / 4 cm |
| Width | 19 in / 48.3 cm | 0.66 in / 1.7 cm |
| Depth | 8.36 in / 21.2 cm | 9.95 in / 25.3 cm |
| Weight | 3.5 lbs / 1.59 kg | 0.45 lbs / 0.2 kg |
Options
| Multimode (62.5 μm) | Multimode (50 μm) | Single-mode (9 μm) |
Maximum Insertion Losses (dB)
| Split Ratio | Multimode 62.5 μm | Multimode 50 μm | Single-mode 9 μm | ||
| (1300 nm) | (850 nm) | (1300 nm) | (850 nm) | (1310/1550 nm) | |
| 50/50 | 3.9/3.9 dB | 4.7/4.7 dB | 4.5/4.5 dB | 5.5/5.5 dB | 3.6/3.6 dB |
| 60/40 | 3.0/5.0 | 3.8/5.7 | 3.7/5.6 | 4.7/6.6 | 2.8/4.8 |
| 70/30 | 2.3/6.3 | 3.0/7.0 | 2.9/7.0 | 3.9/8.0 | 2.0/6.1 |
Supported Media
| Fiber type | Single-mode | Multimode |
| Connector | LC | LC |
| Fiber Diameter | 9 μm | 50 μm or 62.5 μm |
| Wavelength Range | 1310 nm or 1550 nm | 850 nm or 1300 nm |
Environmental Requirements
| Specification | Operational Range |
| Temperature Range (operating) | -40° to 185° (F) / -40° to 85° (C) |
| Temperature Range (storage) | -52° to 185° (F) / -47° to 85° (C) |
Suivi à chaque étape
Nous assurons l’assistance, les services, des formations complètes ainsi que les ressources qu’il vous faut. Tout cela dans le but de maximiser la valeur de vos investissements VIAVI.
Laissez-nous vous aider
Nous sommes là pour vous aider à prendre une longueur d’avance.