The JDSU 10 GigE/GigE Interface (J6872A) is a full length, full-height PCI Express® interface card that provides full 10 gigabit capture, extensive filtering, and network key performance indicators to solve more network problems quickly.

The JDSU 10/100 BaseFX Ethernet LIM (J6831A) plugs into the Protocol Analysis Probe - DNA (J6801B), Protocol Analysis Probe - DNA MX (J6802B) and Protocol Analysis Probe - DNA PRO (J6803B) platforms.

The JDSU 10/100 BaseTX Ethernet LIM (J6830A) plugs into the Protocol Analysis Probe - DNA (J6801B), Protocol Analysis Probe - DNA MX (J6802B) and Protocol Analysis Probe - DNA PRO (J6803B) platforms.

The JDSU 1000 BaseX Ethernet LIM (J6832A) accommodates a pair of GBIC interface adapters for handling Gigabit Ethernet over short reach (SX) or long reach (LX) optical fiber, or unshielded twisted pair (UTP), Category 5 cable, or any combination of these.

The JDSU 16 Port Ethernet LIM for J6804A (J6851A) plugs into the JDSU Protocol Analysis Probe - DNA HD (J6804A) and is used for data acquisition, filtering, and time-stamping of Ethernet traffic for analysis with the JDSU Signaling Analyzer Real-Time (SART) and the JDSU NgN Analysis System.

The Xgig Fibre Channel Load Tester is the first generation tool with a high speed 14 Gbps Fibre Channel (16 GFC) protocol available on the market.

The JDSU Four Port OC-3/STM-1 LIM Multiplexer (J6828A) is designed to be used with the JDSU STM-4/OC-12/STM-1/OC-3 LIM (J6810B) to allow the simultaneous monitoring of both directions of four STM-1/OC-3 circuits.

SONET/SDH fiber characterization, service verification, and troubleshooting with ITU-T and GR-253-compliant optics, optical power measurement, and frequency offset adjustment and measurement.

Athermal 50/100 GHz Dual Optical Frequency Interleaver (OFI) module.

The JDSU Eight-port E1/T1 LIM (J6824A) helps network professionals isolate and resolve network problems quickly on ATM Inverse Multiplexing for ATM (IMA) and 3G networks.

The JDSU 8 Port Ethernet LIM for J6804A (J6850A) plugs into the JDSU Protocol Analysis Probe - DNA HD (J6804A) and is used for data acquisition, filtering, and time-stamping of Ethernet traffic for analysis with the JDSU Signaling Analyzer Real Time (SART) and the JDSU NgN Analysis System.

Our solution for fixed voice is the most scalable and easy-to-use system for network, service and voice-quality monitoring, diagnostics, root cause analysis and repair.

Mobile data assurance solutions monitor and troubleshoot GPRS, UMTS, CDMA 2K and LTE networks (including interoperability) and are a key tool for monetizing data bandwidth, with unmatched Business Intelligence (BI) functionality.

Our industry-leading Mobile Soft Switch (MSS) solution is the most effective way to maintain high quality voice and SMS services, and hence revenues, as you make the transition to Voice over IP (VoIP).

Compact, modular performance monitoring solution for optical fiber links.

The Serial ATA Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics that are needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration post-capture filtering of Serial ATA packets.

The ATA/ATAPI/UDMA Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding, and statistics needed by software and systems testers. The ATA/ATAPI pod supports both normal and small form-factor connectors.

The CardBus Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of CardBus transfers.

Without a CE-ATA protocol analyzer, storage, silicon and design engineers will find working with this new storage technology challenging.

The Compact Flash Pod turns the Bus Doctor into a full-featured protocol analyzer, supporting 3.3V systems, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of Compact Flash transfers.

With its modularity, portability, deep trace buffers, versatile configurability, and feature-rich software, the Bus Doctor Rx is the world's most powerful protocol analyzer. The Rx is compatible with all Bus Doctor protocol analyzer bus pods, the industry's largest selection.

The Logic Pod turns the Bus Doctor into a full-featured logic analyzer, with the depth, ease-of-use, symbolic decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis. Each Logic Pod has 18 channels for logic analysis.

The new and advanced Bus Doctor Gen 2 PCIe protocol analyzer supports bi-directional traffic capture and analysis of PCIe x1, x4 and x8 modes. Powerful pre-filtering and triggering options permit engineers to home in on any sequence of PCI events or conditions. In the x8 configuration, up to 18.4 GBs of capture buffer is available.

The PCMCIA Pod turns the Bus Doctor into a full-featured protocol analyzer, supporting 3.3V systems, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers such as multi-level triggering, filtering, state configuration and timing analysis of PCMCIA transfers.

The SCSI 320 Pod turns the Bus Doctor into a full-featured protocol analyzer, with the depth, ease-of-use, protocol decoding and statistics needed by software and systems testers. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of SE and LVD transfers.

The Bus Doctor RX SD/SDIO/MMC protocol analyzer allows storage, silicon, and design engineers working with this technology to capture, decode and analyze bus states, command tokens, and response tokens, and to measure bus performance.

The USB Pod turns the Bus Doctor into a full-featured protocol analyzer with the depth, ease-of-use, protocol decoding, and statistics needed by software and systems testers. It supports Low, Full and High speeds (USB 1.1 and 2.0) and has a special Chirp mode for viewing the chirp handshaking activity. It also provides the features needed by hardware engineers including multi-level triggering, filtering, state configuration and timing analysis of USB transfers.

The industry's most advanced and scalable wireless subscriber simulation and test systems for EVDO technologies.

The industry's most advanced and scalable wireless subscriber simulation and test systems for UMTS / HSPA technologies.

The industry's most advanced and scalable wireless subscriber simulation and test systems for LTE technologies.

CellAdvisor Base Station Analyzers contain all the features and capabilities required to perform field testing of cell sites of all wireless technologies, from 2G to 4G.

CellAdvisor Cable and Antenna Analyzers JD720 are the optimal test solution to characterize cell site infrastructure due to its handheld design, ease of use, and rich functionality.

Multi-purpose solution for the analysis of RF systems covering all physical aspects of transmission, reception, and interference of RF systems up to 8 GHz.

CellAdvisor Signal Analyzers contain all the features and capabilities required to perform cell site field testing for all wireless technologies from 2G to 4G.

The world’s most-advanced Cat-5e, Cat-6, Cat-6A, and Class FA copper certifier is also the fastest loss/length (Tier I) fiber certifier.

Advanced Fiber Optic Connector End Face Cleaning System

Universal Mux/Demux device capable of combining nine optical signals into a fiber pair.

Tests CATV and security camera coax connections and installations.

Monitoring, communication, and management of WaveReady modules when mounted in a WaveReady 3000 series platform.

The WaveReady Communications Module 300 (COM-300) is a new genera¬tion of WaveReady Node Controller that provides enhanced monitoring, communication, configuration, and management of WaveReady modules when mounted in a WaveReady 3000-series platform.

The c-Series testers provide general purpose, high-performance solutions for new labs and new engineers entering the industry. The c-Series offer an attractive entry level suite for small- and medium-sized connector and patch cord manufacturers.

The cLED-A1 provides a compact, intuitive light emitting diode (LED) source designed to enable applications ranging from simple continuity verification and insertion loss testing to integration into process automation equipment designed for alignment.

Optimized for applications ranging from general lab use to test and process automation for passive optical components.

Enables applications from continuity verification and return loss testing to integration into process automation equipment designed for robotic alignment.

Module for comprehensive copper installation, testing and maintenance up to full-spectrum 30 MHz VDSL for FTTx and Access networks.

The COSA-4055 module offers the functionality and speed of an OSA in a handheld form factor at a fraction of the price of a traditional OSA. It is an ideal test tool for metro/access links and CWDM systems.

In-Service CWDM OTDR test solution to maintain and troubleshoot CWDM fiber networks.

Flexible, low-cost CWDM OADM splice packs solutions expand the capacity of existing fiber while allowing 1310 nm pass-through traffic to continue unobstructed through the bus or ring.

Flexible, low-cost CWDM OADM splice packs solutions expand the capacity of existing fiber.

Flexible, low-cost protected add/drop configuration solutions with highly reliable passive optics that are certified for environmentally hardened applications enables capacity expansion of existing fiber.

Flexible, low-cost solutions with highly reliable passive optics that are certified for environmentally hardened applications enables capacity expansion of existing fiber.

Flexible, low-cost solution that enables capacity expansion of existing fiber coupled with highly reliable passive optics, which are certified for environmentally hardened applications.

Reliable, cost-effective 8-Channel CWDM Mux/Demux multiply the capacity of existing single mode fiber, by combining up to eight ITU-T G.694.2 compatible channels into a single optical fiber.

Negative dispersion for DWDM transmission systems, can be used to compensate dispersion on standard single-mode optical fiber (SMF) across the entire C-Band.

Allocate valuable testing and troubleshooting resources more effectively via remote PC access to JDSU communications analyzers.

JDSU E6474A Analysis Solution for Network Optimization. Use JDSU's Drive Test data to create customer reports, pinpoint network problems and solve them.

Handheld field meter for DOCSIS/EuroDOCSIS cable modem installation; enables cable installers to increase the speed and efficiency in deploying high-speed data and video services.

Combines triple-play services testing, forward and return path maintenance, and Stealth Sweep™ Technology to deliver award-winning performance.

Increases technician productivity with intuitive portable interface and ability to view all necessary test results, including all channels and multiple measurements, on one large screen remotely.

Flexible, low-cost 100 GHz OADM family of solutions to enable capacity expansion of existing fiber; a single optical fiber can carry up to 32 discrete optical channels.

13-Channel DWDM Mux/Demux modules with low-loss narrowband filters allow 13 ITU, 200 GHz spaced channels to be multiplexed onto a single fiber.

Maximizes the capacity of the C-band range, and in conjunction with the WaveReady line of transponders and amplifiers supports a wide range of architectures.

Scalable high-capacity terminal DWDM solution that allows multiplexing of up to 44 wavelengths to a fiber pair.

Family of flexible, cost-effective solutions expands the bandwidth capacity of existing fiber, ideally suited for outside plant (OSP) deployments.

The JDSU E1 (75 Ohm BNC connectors) LIM (J6817B) can be used with the Protocol Analysis Probe - DNA (J6801B), the Protocol Analysis Probe - DNA MX (J6802B) and the Protocol Analysis Probe - DNA PRO (J6803B) platforms. It has 75 Ohm BNC connectors.

The JDSU E1/T1 (RJ45/48C & DB9 connectors) LIM (J6816B) can be used with the Protocol Analysis Probe - DNA (J6801B), the Protocol Analysis Probe - DNA MX (J6802B) and the Protocol Analysis Probe - DNA PRO (J6803B) platforms. It has RJ45/RJ48C and DB9 connectors.

The JDSU E3/T3 (DS3) LIM (J6813B) helps network professionals isolate and resolve network problems quickly and has 75 Ohm BNC connectors.

The industry’s broadest range of enterprise test capabilities in a single tester for IT organizations that maintain Ethernet/IP Local Area Networks (LANs).

Integrated automated test facilities for testing long-term reliability of optical components while subjected to environmental stress conditions in a temperature/humidity chamber.

Handheld Analog Video Probe Microscope for Basic Fiber Inspection

Handheld Analog Video Probe Microscope for Fiber Inspection

Data management software that supports DSAM models.

Ruggedized Optical Fiber Damage/Break Locator

Identifies optical fibers by detecting the optical signals being transmitted through a single-mode fiber.

Live Fiber Identifier easily identifies the optical signal without having to disconnect the fiber or disrupt network traffic. Also converts to an Optical Power Meter (OPM).

FBP Video Probe Microscope & USB 1.1 Analog-to-Digital Converter

Automatic bi-directional IL, ORL and OTDR test solution for use in the installation, turn-up, and maintenance of FTTx/PON, Access and Metro Networks.

Automatic bi-directional IL, ORL and OTDR test solution for use in the installation, turn-up, and maintenance of FTTx/PON, Access and Metro and Long Haul Networks.

Coaxial Illumination (FM-C), Dual-illumination (FM-DI) and oblique illumination (FM-E & FM-L) Handheld Optical Microscopes for Fiber Inspection.

Dual-illumination Handheld Optical Microscope for Fiber Inspection

Oblique llumination Handheld Optical Microscope for Fiber Inspection

Oblique Illumination Handheld Optical Microscope for Fiber Inspection

FVA Benchtop Microscope fully automates the inspection process and is used to detect scratches that technicians may miss. FiberChekPRO™ then provides Pass/Fail results.

Benchtop Microscope & Automated Inspection & Analysis Software

The HD1 Handheld Display with 3.5-in LCD for use with FBP-series probes

Rugged, Versatile Handheld Display with 3.5-inch TFT LCD

Small Form-factor Display with 1.8-inch TFT LCD

Integrated patch cord viewing microscope for significant increase in workflow efficiency and decreased total inspection time.

HD TAP densities allow networking professionals to include TAPs within their networks at deployment time, creating a permanent, fail-safe, and passive traffic access point to network traffic.

The JDSU High-Speed Serial Interface (HSSI) LIM (J6821A) helps network professionals isolate and resolve network problems quickly.

Enables multi-play service providers to gain visibility into their customers’ quality of experience as seen at the home.

The HP2 is an advanced handheld display system featuring a high resolution 3.5 inch display for inspecting fiber endfaces and a built-in optical power meter for quick, easy, and accurate field measurements.

Handheld display system featuring an integrated optical power meter (OLP-34) that lets users inspect and test fiber with one device; includes a dedicated patch cord microscope.

Premier triple –play access network tester installs and maintains copper and fiber based bonded ADSL/VDSL, IPTV, Microsoft TV, VoIP and data plus legacy networks.

Optional Infineon Technologies chipset and licensed option for Dr. DSL diagnostic solutions from Aware, Inc. for testing high bit-rate triple-play services, including HDTV and IPTV.

Delivers subscriber-level usage and experience data providing mobile service providers more effective ways to manage their networks, services and customers.

The JDSU Inverse Multiplexing Multilink License (J6825A) provides a single use license to activate software allowing IMA analysis on link groups of 2 to 8 links using the JDSU Eight-port E1/T1 LIM (J6824A).

Integrated in-service test solution combining a PMD analyzer, an In-band OSA and a high resolution OSA to qualify and troubleshoot high speed DWDM and ROADM networks.

16x1 5-1000 MHz, 75 Ohm, RF input switch controlled by the RSAM to provide monitoring at up to 128 different test points.

J-Complete is a suite of automated test applications that simplify installation and troubleshooting of Carrier-grade networks.

Offers an amplified spontaneous emission (ASE) output that features flattened high power density across the C-band. The source provides high spectral stability.

Six different configurations available: pre-amplifier, booster, booster high-power, mid-span access booster, in-line and booster DWDM. Features a low noise figure, high output power, and high gain.

Cassette that produces a stable light source at desired wavelength.

Bidirectional Stepper-Motor Based Switch Cassette that allows connection of a common port to up to 50 channels.

High-power LED-based light source with variable output power.

Cassette that uses a 3 mm InGaAs detector to measure from 10 to -80 dBm over the wavelength range of 800-1650 nm.

Optical Switch Module built on the industry-leading, fourth-generation instrumentation class of JDSU optical switch technology.

Singlemode Insertion Loss / Return Loss test meter and fully EF-compliant multimode Insertion Loss test modules for use with the JDSU advanced MAP-200 platform.

Cassette that provides an efficient and precise way of creating any state of polarization.

Prism-Based Switch Cassette that accommodates a number of switches with varying channel counts and latching modes at a low cost.

Test solution for manufacturing and new device development of passive DWDM devices, ROADMs & Circuit Packs. Provides full characterization of wavelength dependence performance

MAP-200 Tunable Distributed Bragg Reflector (DBR) laser (mTLG-B1) is a new-generation tunable laser that is ideal for DWDM testing where the capability to change wavelength on demand over the C- band with 50 GHz spacing is essential.

Cassette that simplifies mechanical integration of passive optical components for test sets.

Provides precise levels of return loss to transmitters, which allows measurements of system sensitivity or system degradation as a function of backreflection.

High-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.

Medusa Labs Test Tools Suite is leading application-based data testing and signal integrity testing tool enabling developers to identify, locate, and resolve elusive errors through stress testing before products are released to market.

Gain circuit access without disconnecting equipment; angled sturdy copper contacts prevent clips from disconnecting during testing.

Measures optical power via a USB 2.0 connection to a PC/laptop - makes digital processing of optical power measurements possible and integrates directly with the JDSU FiberChek2™ software.

The JDSU MPLS Analysis Software (J6766A) captures and decodes MPLS signaling and data protocols in real time. Filter on MPLS stack labels, track different class of service priorities, and perform MPLS CoS measurements.

The MicroStealth QAM signal level meter is the ideal tool for installation and field technicians seeking to quickly ensure the quality of RF analog and digital cable services.

Hands-free test set for the installation, turn-up and maintenance of fiber optic networks.

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance.

The MTS-5800 Handheld Network Tester is the industry’s smallest 10G handheld instrument and supports testing throughout the entire service life cycle including installation, troubleshooting, and maintenance.

Compact, lightweight test platform for installing and maintaining fiber networks; performs full fiber characterization measurements.

Multi-layer compact network test solution for network installation and maintenance of metro core networks.

The MTS-8000 is the world’s most scalable test platform for next generation high speed network deployment (40G and 100G). It’s a multi-application platform with physical, optical and Transport / Ethernet testing capabilities.

Industry’s most compact 10 GigE multifunction tester for the installation and maintenance of carrier-grade Ethernet and Internet Protocol services.

Optical test and measurement platform optimized for cost-effective development and manufacturing of optical transmission network elements.

"Shifts" the transmission 1310 nm signal to the 1550 nm fiber window, using WDM to combine the 1550 nm signal with the receive 1310 nm signal.

Multiservice, multiport, OTN standards based muxponder transparently aggregates up to eight client signals into a single wavelength.

Provides performance management capabilities including data collection, correlation, analytics and reporting enabling service providers to proactively identify faults, troubleshoot and resolve problems and perform trend analysis and capacity planning.

Centralized Ethernet Turn-Up Test and Troubleshooting tool for Service Activation of Business Ethernet and Mobile Backhaul applications.

Comprehensive system for commissioning, troubleshooting, and managing xDSL services including pre-qualification, turn-up, spectrum management, narrowband/wideband copper, and xDSL service testing.

Video service assurance solution that provides quality of service monitoring, in-depth visibility, problem detection and fault isolation capabilities.

Rapidly analyze and troubleshoot LANs, WANs and ATM networks with JDSU Network Analyzer protocol analysis software – now integrated with PacketPortal™ from JDSU.

JDSU Network Analyzer 10 GigE Software (J6865A) lets you quickly troubleshoot and perform complete protocol data analysis on 10 Gigabit and 1 Gigabit Ethernet networks.

Download the JDSU Network Analyzer Software Standard Edition - Free (J6838A) software and discover the power of JDSU network troubleshooting solutions.

Post-processing PC software solutions for off-line analysis and report generation of Loss, Return Loss, OTDR, Dispersion (CD & PMD), Attenuation Profile (AP) and OSA test results.

Post-processing PC software for optical cable acceptance test report generation.

Expedites test results reporting in the field.

A family of pocket-sized and low-cost optical power meters for the installation and maintenance of singlemode and multimode fiber optic networks.

Designed for FTTx service activation and maintenance.

A family of pocket-sized and low-cost optical light sources for the installation and maintenance of singlemode and multimode fiber optic networks.

Includes a light source (OLS-3x), a power meter (OLP-3x), and additional accessories.

Can contain an optical power meter, an optical light source, an optical attenuator, and accessories in a carrying case.

ONMSi Optical network test and monitoring system for Core, Metro, Access and FTTH networks.

Testing and verification for physical and transport layer, jitter and wander at bit rates of 40/43G with unframed signal and framed signals for SDH/SONET/OTN.

Tests boards and systems with combined transport technology and DSn/PDH services; provides testing functionality for T-carrier and E-carrier signals including multiplex chains.

Addresses the need for evaluating fully interworking New Generation SONET/SDH with Ethernet services at electrical and optical interfaces.

Provides full functionality for system verification of G.709 and G.sup43 equipment, including extensive FEC testing.

Generates and analyzes jitter/wander measurements of 155 M to 10 G SONET/SDH, 2.7 G and 10.7/11.1 G OTN (G.709), GE, and 10 GE signals to ITU-T jitter/wander standards O.172/O.173/O.174.

Addresses the needs of R&D and SVT labs with all of the necessary functionality for testing OTN/LAN/WAN/SDH/SONET/FC networks at various wavelengths.

In combination with ONT 2.5G and 10G, allows generation and analysis of up to 1,000 simultaneous VC-12/VT1.5 channels in 2.5 and 10 Gbps signals.

The industry's first fully functional Ethernet over SONET/SDH test solution, including Virtual Concatenation with LCAS emulation, Generic Frame Procedure, and Ethernet MAC frames.

Highly configurable, multi-application and multi-port platform for system verification and acceptance testing.

SONET/SDH modules that offer the highest degree of flexibility for multi-port applications.

The ONT-100G solution supports testing and verification for new high-speed network elements for 40GE and 100GE Ethernet. It allows the evaluation of the physical layer, PCS / MAC layers, and QoS testing at bit rates of 40GE and 100GE.

Portable solution that supports ONT modules for 40/43G, Carrier Ethernet and Multichannel; designed for SVT groups at network manufacturers as well as service providers.

Portable solution that offers multi-channel test and multi-port configuration capabilities for manufacturers, development and system verification for transport testing up to 40/43G.

Rack-mounted solution that provides multi-channel test and multi-port configuration capabilities for manufacturers development and system verification.

The MTM provides high density 155M to 11.1G testing at layers 1 through 3. Concurrent users can control a broad protocol range including OTN, GigE/10GigE LAN, SONET/SDH, and Fibre Channel.

User-configurable L-band DWDM optical amplifier provides a simple, economical L-band optical amplification solution in a flexible, ready-to-use package.

Simple, economical C-band optical amplification solution in a flexible, ready-to-use package includes an advanced gain control circuit, an efficient pump laser and a midstage variable attenuator.

User-configurable DWDM optical amplifier provides a simple, economical C-band optical amplification solution in a flexible, ready-to-use package.

User-configurable, single-channel optical amplifiers that provide simple and economical C-band optical amplification for single-channel applications in a flexible, ready-to-use package.

Integrated fiber characterization and dispersion test solution combining PMD, CD, and AP measurements to characterize high speed networks.

Family of handheld instruments ready to support the newest applications including FTTx, CWDM, DWDM, 40 Gbps, Ethernet, and Gigabit Ethernet.

Full range of optical spectrum analyzers for spectral measurements in CWDM, DWDM, and ROADM testing-based systems, providing true OSNR measurements based on the unique JDSU in-band OSNR method.

Range of fully non-blocking optical switch modules from Polatis designed for OEM integration.

Multimode optical switch trays from Polatis that utilize DirectLight® beam-steering technology to deliver high performance in a compact, fully non-blocking, multimode product.

Range of fully non-blocking optical switch units from Polatis designed for 19" ANSI and ETSI rack equipment practice.

Compact full band optical spectrum analyzers for CWDM and DWDM systems.

OTDR test solution for use in installing, turning up, and maintaining metro, FTTx/PON, access, and enterprise networks.

OTDR test solution for use in the installation, turn-up, and maintenance of Entreprise, FTTx, Access, Metro, very long haul and ultra long haul networks.

Provides clear digital voice transmission over a single fiber; hands free operation makes communication convenient for technicians using a headset or speaker phone mode.

Rack-based unit for the Remote Fiber Test system that combines OTDR and optical switch technology to allow a single OTU-8000 to test hundreds of fiber links within a 40,000 km2 area.

For fault location in fiber optics networks.

Automated Fiber Inspection & Analysis Probe provides PASS/FAIL capability to PC/Laptop

Automated Fiber Inspection & Analysis Probe provides PASS/FAIL capability to JDSU test solutions.

PacketInsight is an intelligent packet capture appliance offering a revolutionary real-time network monitoring and diagnostics tool.

PacketMaker is a flexible traffic generation product for high-speed serial storage buses.

Simultaneous return path monitoring, live remote client spectrum views, constant performance history, and remote spectrum views on field meters.

For QAM and Analog RF testing, including MER, BER, and level; provides remote analysis of CATV forward path systems.

Allows remote access to the live spectrum analyzer; provides performance history reports, and automates the node certification process allowing operators to prioritize their workforce more efficiently.

Makes every structured cabling installation more professional and profitable.

Fast, cost-effective and accurate polarization mode dispersion (PMD) testing for high speed networks characterization.

A portable data acquisition and analysis system used for remote and distributed troubleshooting. You can control a DNA locally or remotely from a separate PC. The DNA includes acquisition hardware and accommodates line interface modules (LIMs).

The JDSU Protocol Analysis Probe - DNA HD (J6804A) is a rack-mountable protocol acquisition and analysis solution. The probe supports an 8 port gigabit Ethernet LIM or a 16 port gigabit Ethernet LIM. It is designed for use with the Signaling Analyzer Real Time (SART) application or the NgN Analysis System software.

The JDSU J6802B Distributed Network Analyzer MX is a rack-mountable protocol acquisition and analysis solution, with an embedded PC and integrated Network Analyzer software application. The DNA MX includes data acquisition hardware and accommodates line interface modules (LIMs).

The JDSU Protocol Analysis Probe - DNA PRO (J6803B) is a portable protocol acquisition and analysis solution, with an embedded PC and integrated Network Analyzer software application. The DNA PRO includes data acquisition hardware and accommodates line interface modules (LIMs).

VoIP/IMS analysis software and remote software capture agents.

Provides unsurpassed ability to pre-qualify, provision, maintain, monitor, and troubleshoot xDSL triple-play services as well as copper loop and POTS lines.

Enables fully automated service activation and verification for Carrier Ethernet applications including Business Services and Mobile Backhaul.

With easy configuration and full integration with the JDSU RANAdvisor platform, RANAdvisor Backpack is the complete test collection and analysis solution and the lightest backpack available.

RANAdvisor provides a comprehensive set of tools for testing data and video connections over your network. Parallel sequencing enables the full exercising of 3G and 4G broadband data capabilities.

RANAdvisor Gladiator is a post-processing optimization platform that utilizes data from multiple sources. Data streams are combined including air interface & location information to quickly identify and solve network optimization problems.

With easy configuration and full integration with the RANAdvisor platform, you have a complete test collection and analysis solution in the palm of your hand.

The W1314A/B RF measurement receivers are multi-band up to 8, multi technology (LTE TDD, LTE FDD, CDMA, WCDMA, WiMax), portable and rugged solution that meets all your RF measurement needs.

RANAdvisor’s Voice and VoIP quality measurement solution lets you monitor and optimize the voice and VoIP quality of your network, including POLQA.

JDSU's RANAdvisor platform is the industry's most customizable and scalable solution for the optimization of wireless networks.

Allows service providers to assure efficient service turn-up, troubleshooting, and performance management of subscriber services while minimizing field dispatches and trouble tickets.

Allows mobile operators to assure efficient service turn-up, troubleshooting, and performance management of subscriber services while minimizing dispatches and trouble tickets.

Allow mobile operators to actively monitor and improve the quality of services delivered to their end customers.

Allow mobile operators to actively monitor and improve the quality of services delivered to their end customers.

Ruggedized, plug-and-play, 3R (reshape, retime, and regenerate) optical regenerator that increases maximum interconnect distance on single mode fiber.

Rugged optical regenerator that extends the reach of SONET OC-192, 10 gigabit Ethernet LAN and WAN data by up to 80 km over single mode fiber.

Rugged optical regenerator that extends the reach of SONET OC-192 or 10-Gigabit Ethernet wide-area network (WAN) data by up to 80 km on standard single mode fiber.

JDSU Report Center Software (J6848A) allows you to visualize, analyze and document Network Analyzer and Telephony Network Analyzer test results for network characterization, baselining and troubleshooting.

The RSAM-5800XT Remote Service Analyzer Module provides remote monitoring and analysis of forward path signals and is ideal for remote, unmanned hub sites or headends.

High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of CDMA, including CDMA One and CDMA2000.

High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization and complete coverage of architectures to correlate calls end to end from Core to the rest of the network.

High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting and RAN optimization. Its intelligent call trace-centric approach supports the evolution of GSM including EDGE, GPRS, EGPRS and UMTS.

High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Specific benefits for IMS include advanced decodes, powerful call traces and efficient signaling analysis.

High-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization.

The JDSU Signaling Analyzer Real Time is the test industry’s most complete, end-to-end analysis and troubleshooting solution for LTE networks, providing comprehensive monitoring and network diagnostics.

The JDSU Signaling Analyzer is a high-performance solution for 2, 2.5, 3G and 4G system verification, troubleshooting, and RAN optimization and Complete coverage of architectures to correlate calls end to end from PSTN to the rest of the network.

The JDSU Signaling Analyzer Real Time (SART) is a high-performance solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization. Its intelligent call trace-centric approach supports the evolution of SS7.

The Signaling Analyzer is a high-performance solution for 2, 2.5 and 3G system verification, troubleshooting, and RAN optimization with an intelligent call trace-centric approach for TD-SCDMA RANs.

A high-performance solution for 2/2.5/3/4G system verification, troubleshooting, and RAN optimization. Real-time diagnostic and troubleshooting capabilities enable network engineers to perform detailed historical data analysis.

The JDSU Signaling Analyzer platform accelerates development and deployment of 3G UMTS networks, helps customers perform verification, troubleshooting, and RAN optimization of ATM-Based UTRAN and migrate their networks to IP UTRAN architectures.

Simple mechanical device used to maximize a satellite signal between the LNB amplifier and the receiver.

High-performance, fully non-blocking all-optical 80x80 matrix switch designed with exceptionally low optical loss, compact size, low power requirements and fast switching speeds.

1U, two-slot, rack-mount shelf ideally suited for remote terminal and stand-alone network applications provides power, monitoring, cooling, and management for all available WaveReady 3000-series modules.

Fan-cooled optical provisioning platform targeted for metro access/edge and Inter-Office Fiber (IOF) applications accommodates up to 13 WaveReady modules managed by a WaveReady communications module.

Holds one or two JDSU Fiber Multiplier modules (BrightSwitch™, and BrightJack™) in a 19 or 23 inch rack.

Ideal for mounting any LGX-compatible passive optical modules -1RU, -2RU, -4RU shelves can be mounted in standard 19- or 23-inch telecommunications racks.

The JDSU Signaling Analyzer Real Time (SART) is a high-performance wireless test solution for 2, 2.5, 3 and 4G system verification, troubleshooting, and RAN optimization.

JDSU small cell solution including NetComplete EtherASSURE and PacketPortal Intelligent Network Visibility and Ethernet Assurance Microprobes.

Icon-based map view of OTDR events and instant pass/fail display for easy OTDR interpretation and analysis.

Handheld field tester for installing and commissioning E1 and Datacom service; offers multiple test modes for E1 and Datacom signal analysis.

Entry-level Ethernet test solution for up to 1G electrical/optical Ethernet interfaces with VLAN, Q-in-Q tags, or MPLS labels and verification of Carrier Ethernet SLAs.

High performance field test tools that integrate fiber inspection, testing, PASS/FAIL analysis and fiber certification into a single handheld device.

Speeds installations of HPNA home networking services and troubleshooting of inside wiring issues.

Handheld service meter for high- speed ADSL-VDSL2 and HPNA networks as well as internal wiring at the customer premises for voice, video, and data services.

Compact, low-cost test solution for installation, maintenance, and upgrades of CWDM networks.

Compact, low-cost test solution for installation, maintenance, and upgrades of DWDM networks.

Supports system testing, installation, maintenance, and production of single-mode fibers; instruments are 40 Gbps ready due to low Differential Group Delay.

Variable optical attenuator with an automatic level controller mode in a single, rugged, handheld instrument.

Supports installation, maintenance and testing of single-mode and multimode networks and cables.

Handheld laser sources offering flexibility to test, install, and maintain single-mode and multimode fiber optic networks for every application from PON to Gigabit Ethernet.

Universal instrument for single-mode fibers from lab through to installation, maintenance, and troubleshooting.

High-performance instrument for field, production, and lab; operates as return loss meter, optical power and loss meter, and laser source.

The most compact tunable optical laser source for field applications; designed to support ROADM network channel routing applications.

All-in-one tool for broadband services installation, including copper, ADSL 1/2/2+, IP data, VoIP, and IP video testing.

Solution for problematic coax home wiring reduces repeat calls and improves customer experience. With DSAM, comprehensively tests home coax networks in less than two minutes.

Compact, easy, upgradable OTDR kit for installing and troubleshooting optical fibers across premises, FTTA, and FTTH networks.

Data analysis software for advanced analysis, reporting, printing, and archiving of test results.

The JDSU STM-1o/OC-3 LIM (J6811A) helps network professionals isolate and resolve network problems quickly and has SC optical connectors.

The STM-4/OC-12/STM-1/OC-3 LIM (J6810B) helps network professionals isolate and resolve network problems quickly on SONET and SDH networks.

StrataSync is a hosted, cloud-based solution that provides asset, configuration, and test data management for JDSU instruments and ensures all instruments have the latest software and options installed.

Test solution for characterizing wavelength dependence of passive optical components; Includes tunable laser source, source optics module, receiver chassis, control module, detector modules and application software.

Programmable benchtop/rack-mount switches that can be controlled from front panel keys and numeric pad or via GPIB and serial RS232 interface.

JDSU modular 1xN controllable switches are designed to connect a single optical channel to any of N channels.

Switch for incorporating customized test assemblies and specialized applications operating multiple source measurement instruments, such as optical spectrum analyzers, wavelength meters, and power meters.

Low-loss optical switching technology provides economical protection against fiber cuts and failures.

Rugged, plug-and-play, bi-directional protection switch for single mode fiber can be used for both equipment or fiber protection.

The JDSU T1/E1 (RJ45/48C & Bantam connectors) LIM (J6815B) can be used with the Protocol Analysis Probe - DNA (J6801B), the Protocol Analysis Probe - DNA MX (J6802B) and the Protocol Analysis Probe - DNA PRO (J6803B) platforms. It has RJ45/RJ48C and DB9 connectors.

Hands-free test set for the installation, turn-up and maintenance of fiber optic networks.

Modular handheld test solution for all-in-one Access/FTTx network and triple-play services installation and maintenance.

This tester is the industry’s smallest 10G handheld instrument and supports testing throughout the entire service life cycle including installation, troubleshooting, and maintenance.

Compact, lightweight test platform designed for installing and maintaining fiber networks; can perform full fiber characterization measurements.

Multi-layer compact network test solution for network installation and maintenance of metro core networks.

The T-BERD 8000 is the world’s most scalable test platform for next generation high speed network deployment (40G and 100G). It’s a multi-application platform with physical, optical and Transport / Ethernet testing capabilities

WorkFlow automation software for the JDSU HST-3000 Handheld Services Tester.

Empowers cable operators to increase customer satisfaction by utilizing customized, automated testing procedures to significantly reduce repeat service calls and increase productivity.

Software for maintaining and optimizing DSAM meters; provides Field Data Management, Meter Browser Management, and DSAM Remote Access.

The JDSU Telephony Network Analyzer (J6844A) simplifies and expedites the resolution of quality and signaling problems in IP Telephony networks with a powerful set of troubleshooting solution for VoIP QoS issues.

Identifies telephone and data lines.

J6900A-001 is the Triple Play Analyzer base software. It conducts real-time analysis of video and voice streams, as well as the performance of your data network.

The J6900A-004 MSTV analysis option provides advanced analysis of Microsoft Mediaroom signaling protocols and media transport metrics.

The J6900A-002 IPTV QoE option performs objective measurements of IP video streams and analyze the reliability of the signaling operations such as channel zap time and VoD commands response time.

The J6900A-003 VoIP QoE option performs objective VoIP MOS and various RTP/RTCP QoS measures, such as packet loss, jitter and delay, etc.

Client side interface for the WaveReady WRT-740/760 series of transponders optimized for a wide range of protocols and available for both single mode and multimode fiber.

Multi-rate, multi-protocol, auto-lock module that translates optical signals between a variety of client-side interfaces into a long-reach, single-mode CWDM interface.

The JDSU WaveReady WRT-781 is a multirate dual-transponder that can support an extended number of services for both CWDM and DWDM transport applications.

Multi-rate, multi-protocol, auto-lock module that translates optical signals between a variety of client-side interfaces into a long-reach, single-mode, DWDM interface.

Multi-rate, multi-protocol, auto-lock transponder module that translates optical signals between a variety of client-side interfaces into a long-reach, single-mode, DWDM interface.

Multi-rate bidirectional transponder that converts short-reach 10 Gb/s optical signals to long-reach, single-mode DWDM optical interfaces.

Multi-rate, full C-band tunable, bidirectional transponder that converts short-reach 10 Gbps optical signals to long-reach, single-mode DWDM optical interfaces.

Dual multi-rate transponder that can support an extended number of services for both CWDM and DWDM transport applications.

Combines traditional SONET/SDH and Ethernet/IP features in a single module including advanced Layer 4 and above application-centric testing, IPTV, and Fibre Channel to 10 Gbps.

Monitor and troubleshoot the performance of IPTV, VoD, VoIP and broadband data applications with Triple Play Analyzer — now integrated with PacketPortal™.

Triple Play Analyzer (TPA) base software conducts real-time analysis of video and voice streams as well as the performance of a data network.

Module for comprehensive IP service-level testing (voice, video, data) for FTTx, Access and Home network turn-up, troubleshooting, and maintenance.

Triple-Play tester performs the work of multiple tools: DSL-safe butt set, network tester, tone generator, cable tester, tone detector, and coax mapper.

Measures conductor length, displays distance to opens or shorts, and generates tone for copper or aluminum wires.

TrueSpeed is the industry’s first RFC 6349-based TCP test. A service provider can run a TCP test during the same truck-roll and with the same skill level technician in about 5 minutes.

Strongest tone generator on the market; generates as much as 700% more power than standard tone generators.

Enables technicians to install and troubleshoot copper-based single pair and bonded pair VDSL2 and ADSL2+ circuits the right-way -- dual ended with UltraFED IIB.

Digital Converter for FBP Probe Microscopes

Monitor and troubleshoot performance of digital video, IPTV and VoD applications with the Video Stream Analyzer. An integral part of JDSU’s end to end video monitoring solutions.

Pocket-sized (FFL-50) and ruggedized (FFL-100) Optical Fiber Damage/Break Locator.

Ideal integration of optical switching, attenuation, and power monitoring in a single, compact package from Polatis.

The JDSU V-Series LIM (J6820B) uses external monitor/simulate cables (J6757A) allowing connection to the appropriate interface type.

The Wander Analysis Software is an advanced synchronization evaluation tool with the ability to import and analyze TIE data. Additionaly the TIE, MTIE, and TDEV evaluation, other analysis functions are available: RTIE, MRTIE, MADEV, ADEV, FFO, and FFD.

Combines industry-leading JDSU optical communications technology into a rugged, easy-to-use, compact, self-optimizing optical amplifier - specifically built for use in harsh conditions while dramatically reducing deployment costs and complexity.

Simple solution for managing WaveReady modules and shelves through direct access to individual modules.

1U-high power supply shelf contains two 330 W flat-profile power conversion cassettes that generate -48 V output.

Identify, clarify, and configure all wireless transmission equipment on a site; provides a clear picture of the range and availability of each wireless access point.

Universal solution for a wide variety of fiber sparing and signal overlay applications.

Conserve fiber by using 1310/1550 nm wavelength division multiplexing to combine two optical signals onto one fiber.

Compact passive optical devices that multiplex and demultiplex two channels onto a single fiber.

The Delay Emulator simplifies test setup and configuration and provides developers with a suite of powerful yet flexible capabilities to accurately emulate a variety of realworld operating conditions.

JDSU's Xgig 10GbE and Fibre Channel Analyzer is a versatile, state-of-art solution for monitoring and analyzing live traffic of different storage protocols, including 10G Fibre Channel, 10GbE, iSCSI, FCIP, iFCP and iWARP.

Fully integrated, stand-alone system with 12/6/3 Gbps SAS multi-functions (Analyzer, Generator, Jammer)

The Xgig 16G Fibre Channel Analyzer is a modular blade for the newly released Xgig 5000 platform designed for high-speed network analysis.

Creates FC protocol traffic at speed of 4, 8, or 16 G FC, to emulate FC devices; replays field issues in the lab to verify bug fixes.

Xgig 40G Ethernet analyzer is a versatile, state-of-the-art solution for monitoring and analyzing live traffic of a wide range of Ethernet protocols.

The Xgig SAS/SATA analyzer is a critically-important tool for engineers developing and troubleshooting products and systems that involve the SAS/SATA protocols.

JDSU’s powerful Traffic Generator and Target Emulator extends the capabilities of the Xgig Analysis and Test Platform to create network traffic at line rate to stress test equipment during development and in-network.

The Xgig 8G Fibre Channel Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market.

Expert software comes standard with all Xgig Analyzers and Bus Doctor Rx Protocol Analyzers to provide a unique and robust set of debugging and analysis capabilities specifically designed to accelerate and simplify device development and troubleshooting.

The Xgig BERT solution simplifies signal integrity verification and high-speed bit error measurements by injecting data patterns into the traffic stream that create worst-case data loading conditions and stress a network's physical layer to its limits.

The Xgig Load Tester quickly and easily verifies data integrity, monitors network performance, and identifies a wide range of sophisticated problems across complex network topologies that would be too difficult to troubleshoot with an analyzer alone.

Xgig, designed for heavy-duty data traffic and complicated network structures, offers the industry a reliable analysis tool for high-bandwidth protocols such as GbE and iSCSI.Xgig® GbE/iSCSI Analyzer

The High Density 10G Etherent/FCoE Load Tester provides the industry’s highest port density, up to 32 ports in a single 3U chassis, for developers to verify the reliability and functionality of 10G converged Ethernet network equipment.

The Xgig® Jammer manipulates live network traffic to simulate errors in real time, enabling users to verify the responsiveness and robustness of error recovery processes.

The Xgig® Analyzer offers a wide array of advanced analysis capabilities to enable users to achieve more robust product performance without sacrificing time-to-market. With its wide range of capabilities, including intelligent triggering, automated capture, and Xgig Expert analysis, troubleshooting time is reduced from hours to minutes.

The Xgig Secure System performs testing of Fibre Channel interfaces configured in any topology including those used in avionic environments, and provides traffic generation, error injection, and advanced analysis with data rates from 1Gb/s to 10.5Gb/s.

Comprehensive multiprotocol analysis, load testing, and error injection for all SAN/NAS technologies.