The JDSU 10 Gb/s 850 nm XFP optical transceiver is a cost-effective, fully duplex, high-reliability optoelectronic (O/E) transceiver that transmits and receives standard compliant high-speed serial 10 Gb/s optical and electrical signals. The JDSU 10 Gb/s XFP optical transceiver provides a single product solution for the IEEE802.3 2005 Clause 52 10GBASE-SR, 10GBASE-SW, and 10GFC optical interconnects that are used in Telecommunication, Data Communication, and Storage Area Network applications. The module complies with the 10 Gigabit Small Form Factor Pluggable (XFP) Multi-Source Agreement (MSA).

The RoHS6/6 compliant XFP optical transceiver features a JDSU 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) and a PIN photodiode. The XFI electrical interface uses 10 Gb/s differential data channels for communications to the module as specifi ed in the 10 Gigabit Small Form Factor Pluggable (XFP) Multi-Source Agreement (MSA). The transceiver’s MSA compliant “hot-z-pluggable” mechanical design provides the system designer a small footprint 10 Gb/s solution and enables high density front-panel designs with up to 16 10G ports per line card. The JDSU 10 Gb/s XFP optical transceiver is a 850 nm wavelength optical transceiver targeted at short reach applications. Link lengths greater than 300 m can be achieved on 2000 MHz•km multimode fiber. 

Key Features

• 850 nm optical signals for up to 300 m reach over enhanced multimode fi ber
• Low power consumption (< 1.5 W max)
• 0°C to 70°C case temperature operating range
• 9.95 Gb/s to 10.75 Gb/s serial optical and electrical interface
• Durable plastic bail delatch mechanism
• LC receptacle optical connector
• Bit error rate < 1×10-12
• Excellent EMI performance
• High reliability
• Requires only 3.3 V and 1.8 V power supplies
• Digital Diagnostic Monitoring support
• XFI AC-coupled electrical interface
• Support both line and XFI system loopback

Applications

• Local Area Network (LAN)
• Storage Area Network (SAN)
• 10 Gigabit Ethernet 10GBASE-SR and 10GBASE-SW applications
• 10G Fibre Channel optical interconnects
• Ethernet switches and applications
• Fibre Channel switches and applications

Compliance

• Compliant with XFP MSA INF8077i Rev. 4.5
• RoHS6/6 compliant
• IEEE802.3 2005 Clause 52 standard
• 10 GFC 1200-MX-SN-I standard
• Class 1 Laser Safety
• Tested in accordance with Telcordia GR-468 standard